for bowls 3 curved and straight
D. Hansen
>
Knowledge You Can Build On — Est. 1998
for bowls 3 curved and straight
D. Hansen
>
Re: Quick poll: # tool rests used?
Bill Turpin in WNC mountains
>I get pre-hardened 1/4" x 6" M-2 tool steel rod from Wholesale Tools for � $1.50. The chisels are much harder than the typical cast iron rests. I use epoxy putty or JB Weld to glue this rod to the top of the tool rests, NOT THE POST. This prevents the nicks caused by abuse or bad checks. Makes use of skews much easier. If you need a custom toolpost, go to Best Wood Tools. They made my offset rest mentioned earlier.
Re: Quick poll: # tool rests used?
Texian
>Own two, use a home made rest 98% of the time, and sometimes the one that came with the lathe.
Re: Quick poll: # tool rests used?
Bill Blasic
>I bought a 12" Robust at Saratoga Springs but find myself using the 12" Powermatic rest because there just seems to be less vibration. I find the Robust is okay for a finishing cut but the tool seems to bounce on it for roughing cuts where the cast iron of the Powermatic just mutes any vibration and a file nearby keeps it smooth.
Re: Quick poll: # tool rests used?
Don Orr
>For a long time I mostly used the stock rest that came with my lathe. Then I had a friend make me a 6" straight rest and used it a lot. Then I made my own 7" rest out of round bar and use that a lot. Now I made an offset straight rest out of 3/8" x 1 1/2" flat stock and use that most of the time. I just made a curved rest for the inside of bowls out of the same stock and it works well. So I have 5 for my big lathe. I also have a few for my mini.
Re: Quick poll: # tool rests used?
Brad Vietje
>2 on the Powermatic -- standard (12"?) and an off-brand 6"
1 on my Nova Comet mini
Also have a curved (inside) bowl rest from Oneway which I use only rarely.
Safe spinning,
Brad Vietje
Newbury, VT
Re: Quick poll: # tool rests used?
Molly Winton
>12" and 6" Woodfast on my Woodfast lathe when turning my 'regular' hollows, and my 6" Robust (love it!!!!!) for my mini hollows. Stock tool rests on my Oneway 1224, but I'll be purchasing a Robust for it in Albuquerque!!!....oh, and I'll be getting a Robust for my Jet mini too.
Re: Quick poll: # tool rests used?
robo hippy
>I guess 4. I have the Oneway large bowl rests, outside and inside. I have the CSUSA blue french curve cast iron rests, and a Robust 12 inch rest that came with my lathe. I have some 1 inch cold rolled rests in various lengths, but don't like them. I like the shape of the french curve tool rest, but only use it on the inside of bowls. The gouge does not slide across the top of it very well, like the Robust one does. That is the difference between cast steel and the drill rod. I have been spoiled. I would like a 14 or 16 inch long Comfort rest, shorter ones for boxes, and maybe a couple for the mini lathe, and deep bowl tool rests that have a hard steel on them like the comfort rest. I would also like a number of different bowl rests. The french curve for inside as the reverse curve on the end makes it much easier to even up the rim of the bowl and to round over the outside and inside of the rim. I could use different radius curves for the different bowls I do, say 4,6,8,10, and 12 inch. I always remove one rest to core, and would then insert a different radius for what ever bowl I am turning. I have never really considered the S curve tool rests. Just looks like too much stuff in the way. I did a 3 day workshop with Stewart and Allen Batty, and only had a straight tool rest for bowl turning on those lathes. I like the curved ones so much better. The leverage advantage with the tool rest closer makes for a much bettet/cleaner cut for me.
robo hippy
Re: Quick poll: # tool rests used?
Bob Moffett
>I have the 12" one that came with my DVR, a 6" made of angle irom, a 18" I use for hollowing and a 4" Robust I use on my mini
Re: Quick poll: # tool rests used?
Bob Moffett
>I forgot a 12" round bar rest and a 6" round bar rest that I rarely use.
Thanks for the referrral
Thad
>Best Woods was prompt in their response, and are helping me out.
~ Thad