Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

New Toy,,,,,,,,, I mean TOOL

Posts

New Toy,,,,,,,,, I mean TOOL

#1

New Toy,,,,,,,,, I mean TOOL

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>A friend closed and auctioned his machine shop. He had an old 15" four jaw chuck left over that he gave me, so I cleaned it up, and fitted it to my big lathe.

I have always just screwed on my work to any of several face-plates, which has always fitted the way that I worked. But now that I have this monster, I am waiting for some inspiration for something creative to come.

I guess I can clamp something 8" with the high side in, and about 17" with the stepped side in.

I would like to hear any ideas that you might have to share. thanks, Keith

Re: New Toy,,,,,,,,, I mean TOOL

#2

a nice setup for a djembe...like below

Thad

>

Re: New Toy,,,,,,,,, I mean TOOL

#3

Re: New Toy,,,,,,,,, I mean TOOL

Brian Simmons, Heflin, AL

>When I turned my 36" poplar bowl, I used a 12" three jaw chuck to hold the axle bolted to a mitsubishi rim that is my large faceplate. 17" in dia at the screw holes. A big chuck does open alot of options.

Re: New Toy,,,,,,,,, I mean TOOL

#4

Re: New Toy,,,,,,,,, I mean TOOL

Donna Banfield

>Keith, David Lancaster (http://www.heirloombowls.com/) uses a machinist chuck when he cores his bowls.

He modified it to fit his lathe, but also modified the sides of the jaws, by putting pins in the sides that set into the wood. He then uses the chuck to 'grab' a half log, and begins coring his bowls. No roughing out the first bowl blank before making the first core, and no chips or waste. The log section that is left in the chuck gets used for firewood.

Re: New Toy,,,,,,,,, I mean TOOL

#5

Roger in MO

Re: New Toy,,,,,,,,, I mean TOOL

Roger in MO

>Keith, with a 4 jaw chuck you can turn off-center which opens some interesting design opportunities.

Its also possible to rechuck an item and get it very close to being perfectly recentered.

Enjoy!

Roger in MO