Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Rotary Carving Tools *LINK*

Posts

Rotary Carving Tools *LINK*

#1

Brad Vietje

Rotary Carving Tools *LINK*

Brad Vietje

>This is a question about larger rotary tools. I have seen a number of sources for the Lancelot -- essentially a small, circular chain saw -- but I am looking for a good source for the Arbortec (sp?), or one like it. I have a friend with both styles, who says the chain saw tools are more aggressive and grabby than the 3-tooth Arbortec-style cutters. He feels the 3-tooth cutter is much easier to control and feels much safer. It looks like Arbortec also makes a multi-tooth hard disk cutter, but that looks more like the chain saw blade...

I'm mostly looking to texture the outside of bowls, so a small tool for tight radius work isn't needed.

Can someone here give both opinions on these larger carving tools, as well as good sources for them? Thank you kindly in advance.

Safe spinning,

Brad Vietje

Newbury, VT


Arbortec Wood Carving Tools

Re: Rotary Carving Tools *LINK*

#3

Ellis Walentine

Auriou has an interesting alternative

Ellis Walentine

>I spotted this baby at the Berea conference last fall. I'm not sure where you can order one, but it looks like it would offer a lot more control and a finer surface (if that's something you want) than the Arbortech type tools. I think it comes in coarse and fine versions.


img

Re: Rotary Carving Tools *LINK*

#4

Re: Rotary Carving Tools

Don Orr

>Brad,

I have the Arbortech minigrinder (complete kit) and it works well and is quite controlable. It's the one Graeme Priddle uses. I have not used it a lot yet though. The best price I found was from Bailey's-a logger/arborist supplier. The wheel is only 2" diameter so it can do some finer work.

Good luck-looking forward to seing what you do with this idea.

Re: Rotary Carving Tools *LINK*

#5

Re: Rotary Carving Tools

Paul Zerjay

>I like the cutzall disks, but find they are too thick to use when trying to cut on edge and make a thin cut curf. I wish I could find a disk that was only 1/8th inch thick

Re: Rotary Carving Tools *LINK*

#6

Re: Auriou has an interesting alternative *LINK*

Mike from St. Clair Shores

>This cutter is available from most Woodcrafts, but the best and cheapest place is the Kutzall E-bay store. The prices there are about 50% of retail. They have also opened a Kutzall Direct Store that is also found in the Link that I have included.

Good Luck,

Mike


Kutzall Closeouts on E-bay

Re: Rotary Carving Tools *LINK*

#7

Re: Rotary Carving Tools

Eduardo sarmiento-hall

>HI just look at this place is really good the grinder type and bits are really good

www.woodcarvwerssupply.com

Re: Rotary Carving Tools *LINK*

#8

Re: Rotary Carving Tools

bowlman

>I have seen the results of using the "Chain saw" type when the chain breaks or stretches enough to come off. An AAW member almost lost his hand. While you can still hurt yourself with the 3 tooth style, the damage ,INMH, would be less.

Another thing ... whichever you use, these are 2 handled tools. Only a fool would use one onehanded.

I purchased my Arbortech Pro from either Treeline or Mountain Woodcarvers. Both excellent businesses. Good luck!

Re: Rotary Carving Tools *LINK*

#9

Re: Auriou has an interesting alternative

bowlman

>Ellis,

If you can find more info on that disk, please post it or send me the info. I'm a big fan of Auriou. Thanks!!!

Re: Rotary Carving Tools *LINK*

#10

Re: Rotary Carving Tools

john lucas

>Wow I had not heard of the chain breaking. I've used mine a lot with no problems. The problem was getting the 2 halves and the chain together when you remove it and replace it. I added a few drops of CA glue and now it's easy to remove and replace.

I do think the Arbortec is easier to control. These tools are 2 handed. Not only is it safer, you have much more control. If you push the tool in too aggessively they will run on you, just like sticking the nose of the chainsaw into something. For very controlled cuts I rotate the blade guard around so it touches the wood and I can use it like rubbing the bevel of a tool. This lets you control the depth very accurately.

I like the Kutzal tools but for some operations they are too thick. Things like cutting grooves for spirals and such can be difficult with the thicker side cutting tools.

Re: Rotary Carving Tools *LINK*

#11

Re: Rotary Carving Tools

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Just had a "doh" moment. Rotating thie blade guard so you can use it for controlling the depth is such a wonderful,, simple idea. Why didn't I think of it first!

Re: Rotary Carving Tools *LINK*

#12

Re: Rotary Carving Tools

john lucas

>I wasn't the first one either and had the same Duh moment when I read that. It really does work wonderfully.

Re: Rotary Carving Tools *LINK*

#13

Steven Antonucci

I have a King Arthur disk

steve antonucci

>The disk attaches to a grinder body ($20 el cheapo import) and has about a 3-4" chainsaw style blade. If you own a grinder, this is an alternative.

At speed, it is no more grabby than a chainsaw, unless you present it to the wood incorrectly. It is definitiely a two hand machine.

Steve

Re: Rotary Carving Tools *LINK*

#14

Re: I have a King Arthur disk

john lucas

>that is what I have and it will fit anything with a 5/8" shaft. I use it on a cheap HF angle grinder. I thought I would by a good grinder and use that when the HF burned up but I have been using it now for 5 years for all sorts of tasks and it won't burn up. I have a makita just in case it does.

Re: Rotary Carving Tools *LINK*

#15

Re: I have a King Arthur disk

Scott in Socal

>In softer woods, I've used flap sander discs a bunch, and they work quite well. Not super fast, but lots of control.

Re: Rotary Carving Tools *LINK*

#16

Re: I have a King Arthur disk

john lucas

>My good friend Brad Sells uses 24 grit sanding discs on the angle grinder. He says it cuts almost as fast as the arbortec but is a heck of lot safer. I haven't tried it yet. I have to build an adaptor to hold my disc and haven't had the time to do it yet.

Re: Rotary Carving Tools *LINK*

#17

Re: I have a King Arthur disk

Paul Zerjay

>I tried those and had problems with burning

Re: Rotary Carving Tools *LINK*

#18

Re: Auriou has an interesting alternative

Pascal Oudet

>there have been a limited number of these 115 mm tools made, before Auriou got out of business. not to be confused with the kutzall weels, these are hand cut rotating rasps. they were quite heavy.

as far as I know, the new factory that restarted from remains of Aurious doesn't make this type of tools anymore.

however, new weels for the mini grinder are being developped by another source (also hand stitched rasps ), I'm actually working with them on this topic. I will have some prototypes with me in Albuquerque, that I'll probably use in my spiky creature demo.

back to the original question, there are several 115mm blades with carbide tips on the market (looks like a saw blades with 3 teeths). Arbortech makes one, but there are other sources. they are thinner than the Arbortech blade with 3 replacable cutters. they are not too aggressive, considering this kind of power carving tools is a bit agressive by nature

Pascal