Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Conventional Woodturners Association *LINK*

Posts

Conventional Woodturners Association *LINK*

#1

Conventional Woodturners Association *LINK*

Ed Moore in SW VA

>A friend, Mike Cunningham, sent me the URL for this new organization and after looking it over carefully and corresponding with Wilford Bickel, I decided to join. What impressed me was the positive attitude that is presented by CWA. While it may have discontent with the AAW to thank for its origins, that is by no means what CWA is about now. They seem to be supporting good woodturning teaching, good woodturning methods, and are interested in working WITH the AAW, not opposing it. I would like very much to see CWA grow into a sister organization with an emphasis on excellent woodturning and I hope that others will sign up also. The turnings I saw pictured on the CWA website are the sort of things I like to make.

My decision is a positive one and while it may be encouraged by the disgusting publication scene at the AAW, this is by no means a protest action. The arrogant removal of the AAW logo from the American Woodturner because it is phallic offends me, but I plan to stick with the AAW and hope to see it survive in spite of poor management by the current Board of Directors.

Check out the CWA website and consider giving it a try and joining with me. It has real potential and let's hope that it flourishes.

Ed


Conventional Woodturners Organization

Re: Conventional Woodturners Association *LINK*

#2

Aage Rendalen

Inevitable

Aage Rendalen

>Thanks for posting the link. The AAW does a great job at promoting woodturning as art, focusing on high-end museum pieces requirig endless hours of off-lathe enhancements. When I look around at club meetings, I don't see many who aspire to scale such artistic heights. Most of us are "conventional" turners who pursue good craftsmanship and delight in creating beautiful, conventional shapes. There is nothing wrong in featuring art pieces that sell for thousands of dollars; it just isn't where most of us are at.

To every action, there is a reaction. I think it was inevitable that such an organization would appear, and I, too, will probably join it and hope that it'll prosper alongside the AAW.

The very best solution would have been for the AAW to operate two organizations, one for conventional turning and one for the Rembrants of the woodworld.

Re: Conventional Woodturners Association *LINK*

#3

Re: Conventional Woodturners Association

Jim Shaver - Oakville, Ont, Canada

>Thanks Ed,

I appreciate the direction and intentions of this group, I may well join, like you, they appear to make what I make.. or at least things that I like to think I can make, LOL...

:-)

Take care,

Jim

Re: Conventional Woodturners Association *LINK*

#4

Re: Conventional Woodturners Association

Don wilcut

>I belong and you should also.

Don

Re: Conventional Woodturners Association *LINK*

#5

Re: Conventional Woodturners Association- VIOLATIO

Michael Mocho

>It's sad that the CWA organization is so young, yet already they will have to remove one of the images posted in the gallery section of the website for a blatant violation of the stated rules. In the last row if images, (center)- there is a burl form with Macasser ebony lid that has what appears to be a CARVED FOOT! Such behavior should not be tolerated for a group that is just trying to keep woodturning PURE!

-


img

Re: Conventional Woodturners Association *LINK*

#6

The piece shown was obviously ...

Ed Moore in SW VA

>turned on the lathe. That it has carved feet shows that CWA doesn't suffer from mental rigor mortis, unlike some.

I regard your smarmy response as more of a measure of you than of the CWA.

Ed

Re: Conventional Woodturners Association *LINK*

#7

Re: Inevitable

Eduardo sarmiento-hall

>I agree totally with that ,not every one has the ,time ,money ,or skill to do other things than turn a nice piece,without all the ,carving painting etc Ill become a member Im all for natural pieces like ellsworth,etc

Re: Conventional Woodturners Association *LINK*

#8

Wait A Minute...

Barbara Gill, Remlik VA

>Ed said:

"The arrogant removal of the AAW logo from the American Woodturner because it is phallic offends me, but I plan to stick with the AAW and hope to see it survive in spite of poor management by the current Board of Directors."

What????? Did I miss something???? Phallic???? Please someone fill me in.

Re: Conventional Woodturners Association *LINK*

#9

Sorry

Barbara Gill, Remlik VA

>I should have posted the above as a new topic. I hope it doesn't hijack your thread Ed.

Re: Conventional Woodturners Association *LINK*

#10

apology & invitation

Michael Mocho

>To Ed Moore and all CWA members:

My apologies for making a comment that was made as an attempt at humor, but evidently offended. Please know I did not mean any disrespect towards any person or groups of turners who choose to focus on a particular set of technical parameters for themselves.

Certainly, no one wants to force anyone else towards or away from any particular technical approach, since each of us has our own internal aesthetic compass and the ample challenges of following it. I realize that within what are considered conventional turning techniques there is a wonderful wealth of design possibilities, and I delight in them. I understand the desire to focus on those possibilities, and the (hopefully) never-ending refinement of form and explorations into the mysteries of these wonderful materials we have the privilege to work with.

My comment was meant to gently point out the contradictions that as humans we are all bound to discover when we attempt to draw any boundaries. I think the piece in the image is quite wonderful, and I applaud the maker following their instincts to turn the form with the tripod base.

There was in no way any inference of �mental rigor mortis�, and my own perspective is that all the work represented on the site was of high quality and thoughtful execution. I have great respect for anyone who chooses to follow their own instincts and preferences in the pursuit of what compels them.

Great turners- such as Bob Stocksdale, Bert Marsh, Mike Mahoney, -and many others, who have gone to great depth within self imposed parameters of form, thereby showing us the value and possibilities of such concentrated focus and often subtle variations available within select variables.

Parallels can be found in almost any other creative pursuit, where one chooses to work within select structure, form, process, scale or any other parameter. The specific joys of a single musician playing a lute are not diminished or made unavailable just because someone else wants to play an electric guitar with electronic effects and amps turned up to 11 (hopefully not in the same room). I can find delight and irritation in both.

My hope is that by sharing our perspectives within the AAW- and such public forums as this- we can perhaps learn from and even appreciate a broad spectrum of possibilities, and still relish the satisfaction of our being engaged in our personal creative pursuits without feeling the need to justify or defend our choices of techniques or materials.

To this end, I have proposed bringing this discussion to a public forum at the upcoming AAW symposium in Albuquerque, in the form of a panel discussion titled �Whose Turn is It Anyway� which is scheduled for Saturday morning- 10:30 till noon in the La Cienega meeting room.

Some of the questions on the table will include:

� Is determining what is and isn�t turning even possible?

� How important are such definitions and do they effect what we make?

� How has the spectrum of woodturning changed since the formation of the AAW in 1986, and what parameters- if any- need to be established for support of the membership?

This session will attempt to explore these questions head-on, and should result in an interesting exchange of insights that will highlight the diversity of motivations, creative perspective, and common ground shared among today�s turners.

Betty Scarpino, the new editor of the AAW journal, has graciously agreed to be on the panel, and we hope to focus on the common ground we share as turners. We invite all perspectives - Come join us for this interesting discussion.

Again, please accept my apologies for offending anyone with my comment.

-Michael Mocho

Re: Conventional Woodturners Association *LINK*

#11

Ed, you just lost me!

mjonesrdg

>Your response seemed more smarmy than did Michael M's. This is a poor way to represent a fledgling organization. After viewing the web site, I wonder how this organization will promote "conventional" woodturning. A gallery only??? No helpful articles or forum for Q & A?

If I were a potential sponsor, I'd now take a "wait and see" position regarding a sponsorship. It looks like some within this new organization still have some chips on their shoulders.

Re: Conventional Woodturners Association *LINK*

#12

And an apology is offered ...

Ed Moore of SW VA

>from me in return. I felt that CWA was being painted with a broad brush that made them look unfairly narrow. In the 24 hours that I have looked at their website and given CWA some thought I have found them to be balanced and not at all like the "turning police" characterization that was implicit.

My position is that there is an interesting group being formed that is focused on good woodturning and we should take a good look at it, and possibly support it. In no way should I be regarded as a spokesman for CWA, my membership application just went out this morning.

Let's put the sand back in the sandbox,

Ed

Re: Conventional Woodturners Association *LINK*

#13

AAW Logo

Mike Cunningham (Cape May NJ)

>Rumor has it that one person and possibly two were responsible for the removal of the logo from the cover of the journal because "they" felt that it was phallic. If true, that is the product of a very troubled mind. Anyone that can see phallic symbolism in our logo sees it everywhere.

Re: Conventional Woodturners Association *LINK*

#14

Agree

Mike Cunningham (Cape May NJ)

>AAW seems to have lost it's way and that's reflected in the journal, in particular the spring and again in the summer issue. The AAW is supposed to be for ALL woodturners and needs to show that with balance in its journal in each and every issue.

Re: Conventional Woodturners Association *LINK*

#15

Re: AAW Logo

charlie belden

>Had to go an actually look at the AAW logo. Triggered a completley different mammary - er - make that memory and associations. (The String Bikini has been taken too far!)

The problem with inductive logic is that you will always be able to find info to confirm that you're conclusion is right - even when it's not.

Re: Conventional Woodturners Association *LINK*

#16

Re: Conventional Woodturners Association

Chip in Plano

>Rats, I don't need politics, opinion or puritism in my hobby, my art, my passion. I know what I like, I know what I appreciate, I know what I aspire to. To which, I will gravitate towards. Otherwise, my feet and my wallet move just fine in other directions.

Goodness, it's just a piece of spinning wood, into which we all stick a sharp steel stick and hang on for dear life for a miracle to emerge.

Re: Conventional Woodturners Association *LINK*

#17

I Have Always Supported the Journal

Barbara Gill, Remlik VA

>At this point I still will. I always find much to interest me.

If in fact one or two very troubled people had enough clout to get the AAW logo removed because they somehow have seen it as a phallic image then in truth the AAW is in trouble.

Re: Conventional Woodturners Association *LINK*

#18

BINGO! The pretty lady in Row 4 ...

Ed Moore of SW VA

>has hit the nail on the head.

Someone showed the logo to a waitress and asked if she saw it as being phallic and told her that someone else did. Her response:

"Heck no! Someone needs some serious couch time!"

Ed

Re: Conventional Woodturners Association *LINK*

#19

Re: Agree

Sean Troy

>Mike, they turned away from thier Mission Statement a long time ago. As far as the logo thing, thats about as rediculous as anything I have ever seen in my life. I guess we better not advertise bowl gouges or round nose scrapers lest they become phallic symbols. Thats an indication of some serious problems within the organization. Anyone notice the quality of the paper in the journal has also gone down hill? It's just not the same quality.

Re: Conventional Woodturners Association *LINK*

#20

Re: Agree

Mike Cunningham (Cape May NJ)

>Look at Bob Rosand's article on parting tools. The very first photograph caption has the ID of the tools reversed. Rather than spending months of time editing and working on the First Segmented Woodturners conference article (as the editor mentions in her letter) perhap a bit of time should have been devoted to looking at photo captions...an obvious error.

One project article but 5 "human interest" (for want of a better term) articles all in one issue. Where's the balance and inclusion?

This is the second issue where the logo is missing from the cover.

Look at the two photos on page 60, almost as good as the "Pre-turned Wood object photo in the last issue. Real inspiration there........

Re: Conventional Woodturners Association *LINK*

#21

I would like to understand

David Belser

>Where the opinion that the AAW has somehow lost it's way comes from.

Is the beef largely with the contents of the Journal?

After reading the comments here I went back and looked through both of the last two issues. They both appear to have a pretty good balance of content. Granted the spring issue has 10 pages of "feature" relating to collecting and studio turning, but there are as many if not more pages of project and technique - a pie crimper, a stool, and faceplate. The previous issue has even more practical technique and project articles.

Is the idea that "conventional" woodturning should be plane wood and utilitarian?

Most of the "decorative" stuff has been around for centuries. Craftsmen have been painting, carving, splitting, reassembling etc. turnings for a very long time. Ornamental, Architectural, Furniture, Sculptural etc. There is a long history.

If you don't want to carve/paint/burn/texture your turnings then don't. Why do you turn? to relax? then don't challenge yourself. I think a lot of turners enjoy the craft part of making useful items that are also beautiful. This means taking the time to do a good job and working an idea to prefect it.

I don't see the AAW as pushing in any one direction. The organization is driven by it's members, and there are many sub-groups. If you have an interest that's undeserved, then work with others that have the same interest to bring more attention to it.

A good example of this is the ornamental turners.

I'm sincere in wanting to understand this attitude, hopefully I won't regret this post.

- Dave

Re: Conventional Woodturners Association *LINK*

#22

Re: Conventional Woodturners Association------WebK

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>You know , it was Freud who said that sometimes a cigar is just a cigar.

------WebKitFormBoundaryMf9ACMuweg2+cKKq

Re: Conventional Woodturners Association *LINK*

#23

Re: Conventional Woodturners Association------WebK

Ken George------WebKitFormBoundarytS+WfE9bDwh70YLf

>It seems that the AAW has gone the way of PC organizations and will make major changes to satisfy a minority. Too bad.

------WebKitFormBoundarytS+WfE9bDwh70YLf

Re: Conventional Woodturners Association *LINK*

#24

Re: I would like to understand

Mike Cunningham (Cape May NJ)

>David,

To answer just part of what you say (I'm headed out the door). Faceplates......Something like 6 or 8 photos and two pages devoted to what should have been a paragraph or two in a tips section. Who needs multiple photos of faceplates to basically be told not to use drywall screws and to pre-drill.

The stool article was more suited to Wood magazine, it was a mortise and tenon article, not a turning article. In fact turning was only mentioned in a few sentences in three paragraphs deep in the article.

The current issue has one turning project that assumes that you want to disassemble your tape measure and make a wood case for it.

I have an interest in artistic turning as well as functional turning but not only has the journal moved too far toward artistic but much of the content is not (Spring issue in particular) even turning related. How about "Spinning" in the spring issue? What was the purpose of showing us a galvanized bucket containing colored light bulbs (not turned by the way) and the Castrol oil can with spout and bulb? How about the pre-turned wood object.

This issue has one project, one article for beginners on parting tools (too bad editing got the parting tool photo caption wrong) and five devoted to "human interest". Anyone of those 5 would be fine in a single issue....but five in one issue?....Saylan, Gilson, Seitzman, Muskego chapel and dysfuntional.........we don't need five of them in one issue.

I am happy to see a return of the Tips section and liked Alan Lacer's article.

I could go on but have to run.......

Mike

Re: Conventional Woodturners Association *LINK*

#25

Re: Conventional Woodturners Association------WebK

Mike Cunningham (Cape May NJ)

>But that move wasn't even PC it was.........well I don't know what to call it but troubling.