Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

How much vibration is acceptable/to be expected?

Posts

Re: How much vibration is acceptable/to be expected?

#26

Re: If the top section is "boxed", fill it with sa

Alex Yeilding

>Yes, it's a box, with ~ 130 lbs of sand in it. Sand is loose, but all joints except the "lid" are either glued or caulked, and ends are in dado in bottom, and sliding dovetails with sides. Hopefully that will be sufficient to avoid leakage.

Re: How much vibration is acceptable/to be expected?

#27

Re: Leaking sand is why washed .......

Jamie D

>...river gravel works much better, and safer around machined and lubricated parts.

Re: How much vibration is acceptable/to be expected?

#28

How about concrete?

Alex Yeilding

>I understand the point about washed river gravel, but presumably it is less dense than sand. If I do end up with leakage, is there any reason not to go the other direction--to concrete? for a given volume, it has 50% more mass than sand, has the added benefit of adding rigidity to the structure. But I never see it mentioned. Is there a downside I'm missing?