Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Something totally new for me! Here is ...

Posts

Something totally new for me! Here is ...

#1

Something totally new for me! Here is ...

Jamie D

>... a just finished commission for a local couple, made from a piece of the maple tree under which they were wed. The log was dry and cracked, and I had great freedom to make a design that would represent their relationship to the tree on their anniversary. The interlocking rings represent their marriage, and I have named the piece "Union." I've never before tried such a large multi-offcentered turning, 13"W x 13"H, and both they and I am pleased with the outcome.


img

Re: Something totally new for me! Here is ...

#2

Mike Stafford

Outstanding execution and concept!

Mike Stafford

>I like this very much and I am sure your clients will treasure this piece for many years to come. Is the piece dated and does it bear the date of their union? It should in my estimation but the client always knows best.

Pretty work, Jamie!

Re: Something totally new for me! Here is ...

#3

Steven Antonucci

I give it an 8 out of 10 :-)

Steve antonucci

>Sorry, couldn't resist the "eight" crack- it's what I saw first when I opened the picture.

How did you mount it? No screw holes in the back I presume?

s

Re: Something totally new for me! Here is ...

#4

Re:Mounting was a large part of...

Jamie D

>...the puzzle when I started, because the log was a full round which I sawed down the hollow and off-center pith. I screwed a faceplate to the flat in front(actually 2 mountings) and turned 2 tenons on the half-round back, 1 for each center, and then mounted in a Stronghold for the 2 face bowls. In the end I bandsawed the back flat and removed all indications of how it was mounted, and should have done that in the beginning to make mounting much simpler! Now I'll know better for the next opportunity!

Re: Something totally new for me! Here is ...

#5

Keith Tompkins

Re: Something totally new for me! Here is ...

Keith Tompkins

>I like this Jamie. The whole thing works; I'm sure the new owners love it!

Re: Something totally new for me! Here is ...

#6

Perfect, that piece will

Richard Jones-

>NEVER find it's way to the back of a closet, it will always be on display, for sure. As stated previously, a perfect concept and great execution, and what a wonderful way to use the wood of the "wedding tree".

A tip o' the hat to you.

Rich

Re: Something totally new for me! Here is ...

#7

Re: Perfect, that piece will

don in ellensburg

>lazerd dates and names would go well with it also

somewhere on it.

Re: Something totally new for me! Here is ...

#8

Re: Something totally new for me! Here is ...

Cyril Griesbach

>Jamie, I saw this posted on WOW but you hadn't put up any description at that time and I did think it was something of a step aside for you. I liked it when I first saw it but now I understand it better and I have to say your design is a real winner.

Re: Something totally new for me! Here is ...

#9

Re: Something totally new for me! Here is ...

Carole Valentine

>Jamie they should be very pleased with that! Did you use any counter weights or anything? My lathe would probably go on a Spring stroll if I ever tried to do any large off-center work on it.

Re: Something totally new for me! Here is ...

#10

Re:Carole- I was concerned about ....

Jamie D

>... adding any counterbalances that could fly off and whack me stupid! My Studly handled it well enough at slow speeds that I could get the bowls turned without much trouble, so I will leave the balancing tricks for another future project.

Re: Something totally new for me! Here is ...

#11

Alright! Now you've got me going...

david

>"and should have done that in the beginning to make mounting much simpler" Your intersecting bowl forms are not very deep, so your faceplate screws could not have been very long. You certainly needed the tenons on the back side to dish out the front (and remove the mounting screw holes). Done what in the beginning? What am I missing here?

Re: Something totally new for me! Here is ...

#12

Re: David- I should have bandsawed the .........

Jamie D

>....back flat in the beginning, then cut the 2 tenons, rather than struggle with a rounded back while cutting the 2 chuck tenons. Does that make sense to you now?