>I will try to e-mail some pics to you later. There are a few pic floating around the net. No I don't sell them but it really was not that bad of a project. If you have basic metal fabrication skills it really is pretty easy.
>I made a tip away mount of the tail stock on my DVR (not XP). It's made of some walnut and aluminum angle I had laying around. It mounts on the end of the ways with a single bolt. My DVR is on a cabinet and when I tipped the TS over, the tip of the quill or the live center would rest on the cabinet. The TS was completely below the level of the ways and the end of the ways was open if you wanted to insert some other device. I have added an extension to my lathe and no longer use the tip over. If you want it, I will send it to you and you can play with it for a while or make an improved version. I think having a surface for the TS to hit as a "stop" would be important. If your cabinet/countertop extends beyond the end of the ways, the locking handle might hit the surface and bind, not sure. It was slightly crude, but worked great for me. If interested send me your address and I will put it in the mail.
>Thanks, Barry, but I really don't need one since I have an extension and rarely remove my TS unless I want to mount a bowl steady or something (or a hollowing rig if I ever get one!) The DVR TS is not that heavy. I was just curious about the construction of Alan's stand.
I have a Jet 1642- 2EVS and REALLY LIKE it. It is heavy and versatile. The electronic variable speed has great power throughout the 2 speed ranges and the ability to reverse rotation is hery handy for sanding. If the 16" swing is ever too small (I doubt it will be for the things I'll typically do)then the headstock can simply be slid to the end of the bed for outboard turning although you would have to buy or build an outboard rig for the tool rest. I have made a number of mods for the 1642 with pictures at the attached link and think this will be the last lathe I'll ever need.