Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Questions about tool rests

Posts

Re: Questions about tool rests

#26

Re: Questions about tool rests

Tom Minehan

>Nothing wrong with the standard rests if you like them. I learned to turn on an old Sears mono tube whose tool rest had a concave face that fit my hand. It still needed to be filed etc,etc. I finally bought a Nova DVR and disliked the standard tool rest from day one. Again it wasn't the maintenance that bothered me it was the shape. When I saw the robust with that concave shape I did the proverbial "leap for joy" and bought the 4"one to see if it would fit my hand like I remembered. It did and I bought the 12". The fact it has a hardened bar on top is icing on the cake - I bought the shape.

Re: Questions about tool rests

#27

Re: Eliot, the reason I glued...

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>Fair enough. Maybe I'll give it a try. But I still don't see why you have to keep dressing yours. I find that I have to dress mine only something like a couple times a month. They don't get nicked much. I think there's more problem with getting off varnish, shellac, glue, etc. than there is filing out nicks. And a rod across the top won't help with that.

Re: Questions about tool rests

#28

Re: Questions about tool rests

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>Ah! Now I see what what may be a good reason to switch -- the shape. I do indeed find that the center post gets in the way when doing skew work. But, again, now that I think about it, even with a rod across the top, isn't there still a center post? Is there a rest with the post off to the side? That would indeed provided an unobstructed run for skew work. Ah, but here I go again: now I would worry about vibration problems.

Re: Questions about tool rests

#29

Re: 2" tool rest

robert davis

>absolutely if u turn small stuff. i use a 2" rest a lot on the jet mini

Re: Questions about tool rests

#30

nicking the rest

John K Jordan

>If the sharp edges of HSS tools (skews, scrapers, parting, bedan, etc.) are not radiused at least a little they can chew up the working edge of a cast iron tool rest.

JKJ