Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Answer to: But It Only Took You An Hour To Make

Posts

Answer to: But It Only Took You An Hour To Make

#1

Answer to: But It Only Took You An Hour To Make

charlie belden

>If you sell your turnings, and deal with the individual thinking about buying one of your pieces, you're gonna be asked "How long did it take for you to make this beautiful (fill in the blank)?

If you answer the question - in hours and maybe minutes - the potential customer will do a quick mental Price/Time calculation - and perhaps balk at the Hourly Rate.

Here's a little story that may be helpful the next time this one comes up.

My oriental brush painting teacher was commissioned to do a painting - the subject matter and price agreed upon in advance.

The buyer asked to watch her do the painting and was rather shocked that it took only about a minute.

"But it only took you a minute to do - for $50!?"

To which my teacher replied "No, it took 20 years - and one minute. THAT is why it's $50."

The buyer understood, and then realized she'd gotten a real bargain. For only $50 she was able to have her own unique painting - that took over twenty years of experience to create - and got to watch it being created!

Of course this only is effective if your piece actually reflects all that you've learned - and used those skills and that hard won knowledge - well.

Re: Answer to: But It Only Took You An Hour To Make

#2

Re: Answer to: But It Only Took You An Hour To Mak

Randy G

>Another good post Charlie, thanks for your several insightful posts lately. Enjoyed them.

Re: Answer to: But It Only Took You An Hour To Make

#3

Re: Answer to: But It Only Took You An Hour To Mak

Norm Smith

>Charlie, Great answer. I will have to use that.

Thanks for posting.

Norm

Re: Answer to: But It Only Took You An Hour To Make

#4

Steven Antonucci

I forget who said it...

steve antonucci

>but someone here posted a similar conversation:

"How much?"

"$50"

"Oh, I wouldn't pay $50 for that..."

"Lady, neither would I, that's why I learned to make them..."

If you don't value my work as much as I do, then you probably shouldn't own it...

Steve

Re: Answer to: But It Only Took You An Hour To Make

#5

Re: I forget who said it...

Harry In beautiful downtown Kulpsville

>I heard that comment or a similar one attributed to Dave Hardy. Dave is a well known turner who has an open house in his shop on the second Tuesday of each month. No official membership, no dues, no food, just one of the best Show & Tell tables in the country. And, this has been going on for well over twenty years. Dave is a bit salty in his old age and I could easily imagine him saying that.

Re: Answer to: But It Only Took You An Hour To Make

#6

Reminds me of an old story...

David Walser

>In the middle of a big production run, a critical piece of machinery quit working. The maintenance team was unable to repair it with they parts they had on hand and learned it would take weeks to get new parts shipped to the plant. The head of maintenance suggested they call in someone who had retired the year before to see if he could do something. The man came in and listened carefully to the machine. He then took out a brass hammer and tapped -- once -- on the machine's exterior. At once it started working again.

The man sent a $1,000 bill to the factory for his assistance. The owner refused to pay it saying, "All you did was hit the machine with a hammer!" The man sent a revised bill: Hitting machine with hammer: $1. Knowing where to hit it: $999.

He got paid.

Re: Answer to: But It Only Took You An Hour To Make

#7

An Old Man, Two Steel Dies & A Drop Forge

charlie belden

>You have to wonder how much knowledge and skill is being wasted - and lost - in nursing homes.

A friend picked up a bunch of stuff from what had been the largest jewelry manufacturer - west of the Mississippi, including some old drop forges and literally a ton or more of steel stamping dies that used them.

You put sheet silver or gold between the male and female dies, hit the uppper one really hard - with the drop forge - and you punch a shaped 3D part - and - if the die is cut right - cut out of the sheet a part ready to apply to something.

The base for the drop forge had jigs to fit on it that would let you align the female part of the die pair to the male part of the die pair which is struck by the drop forge hammer.

But there were some pretty small die pairs for stamping out an effigy of Tojo and another of Hitler - with nooses around their necks. These were soldered onto Zippo lighter cases and apparently sold like hot cakes during World War II.

Problem was there was no positioning jig to hold the female part of these little die and hold it there once aligned. (misaligned dies struck by a two ton drop forge tend to disintegrate when struck - not a good thing).

Now my friend was a great scrounger - how else would he end up with old steel dies and leather belt over wooden clutch wheels driven drop forges - so he also had a pretty well equipted machine shop - and knew how to use all the machines (he'd been a watch maker, along with a dozen or so other things earlier in his life). And being a Yankee, lord knows he tried coming up with a workable solution to his problem.

Eventually he remembered the old guy who used to use these dies and drop forges. Since Ed was also really good at what we now call networking, he was able to find the old man - sitting waiting to die in the lobby of an old hotel converted to a "retirement home", up in San Francisco.

After a few phone calls to set up a visit, we drove up and brought the guy back to Ed's shop.

You know that credit card TV add that ends with - PRICELESS? Well, listening to and watching this old guy - as he told us about those dies and those drop forges, and the things he'd made with them - THAT was truly priceless - at least for me - at age 22. A spark came back into the man - he stood straighter, became more animated, and smiled smiles you'd have to see to really appreciate.

And oh how glorious was the reunion - of two long lost friends. He was like a little kid who just go his lost puppy back - full of joy and happiness.

Eventually, he got down to business, inspecting the set up and asking questions before getting down to solving Ed's problem - which Ed had explained - in great detail.

"Got some bees wax?" the old guy asked, grinning.

"Bees wax?!" I asked.

"Just get me some bees wax - sonny." the old guy "suggested".

So I went in the house to ask Ed's wife Mary if she knew where the bees wax was while Ed and the old guy continuing palavering about tools and machines.

Without asking why, and without batting an eye, she went over to her sewing cabinet, pulled out a lump of bees wax and handed it to me - with instructions to return it as soon as we were done with it. The OR ELSE didn't have to be said.

When I returned to the shop, bees wax obviously in hand, I had to cough - rather loudly - to get their attention. "I've returned with the wax!" I said expecting acknowledgement of completing my quest.

I did get a "harrumph" from the old guy as he took the bees wax from my hand - without glaring at such a young, wet behind the ears, kid.

He rubbed some bees wax on the drop forge's table, stuck a small female die on it, lowered the hammer onto the male die and then asked "Got any linoleum or tar paper handy?".

I took that as another Quest assignment and head out to the barn (of course Ed also had a barn - full of all manner of things - including both linoleum and tar paper).

Once again, I returned from a Quest, a piece of tar paper in one hand and a piece of linoleum in the other. And once again a loud cough was required to interrupt the conversation that was going on.

This time I got a "Thanks sonny." as he selected the piece of linoleum. Maybe the old guy just might think of me as someone who wasn't a total idiot after all.

The old guy returned to HIS drop forge, did a little tweeking of the dies positions - inserted the linoleum between them - pulled down on the leather strap's handle and the forge's hammer rose up toward the ceiling. Then he let go of the handle. The hammer raced down, following it's cast iron guides - and struck the die - once (the old guy had grabbed the handle on the leather strap that attached to the hammer, and went over a wooden pulley on an overhead shaft turning shaft - to keep the hammer from "double striking".).

He took out the stamped part, examined it closely, struck another test, checked it and said "DONE! And THAT - Sonny - is how you align these little dies." And he stood up even straighter, and his eyes sparkled even brighter and the ear to ear grin on his face - PRICELESS.

For the next three weekends, one or both of us would drive up to San Francisco, pick up the old man and bring him to his Old Friend.

On our fourth trip to get him we were saddened to learn that the old man had passed away - to no surprise to the folks at the retirement home. They frankly were amazed that old Kurt had hung on so long, he'd been so frail and sickly for so long.

But Ed and I were sure we knew why he'd hung around - waiting for someone to Pass It On To before he moved on. I guess Ed, and maybe, just maybe, I, had shown him that we'd carry on what he taught us - at least for a while longer.

This all took place about 40 years ago - and the memory of that experience, and that old mans grudging smile - priceless.

You have to wonder how much has been lost - and is being lost - in some retirement home nearby.

Oh - and Steve - tact is useful when in retail ; )

Re: Answer to: But It Only Took You An Hour To Make

#8

Awesome story, Charlie,

Al Neighbors

>and very well told, I might add.

Well worth the time to read it.

Priceless!

Re: Answer to: But It Only Took You An Hour To Make

#9

Steven Antonucci

Great story indeed...

steve antonucci

>and I know about "tact in retail." A few years back, I had a deadman switch put in between my mouth and my brain. I pull it before I go into a sales call to avoid having my thoughts leave my head into the open air :-)

S

Re: Answer to: But It Only Took You An Hour To Make

#10

Re: Great story indeed...

charlie belden

>Steve:

Got a supplier and part number for that switch, my Engage Brain BEFORE Operating Mouth sign seems to be losing its effect.

In an earlier life I had to interact with land developers. Somehow I was able to not say - out loud - "You'd bitch if you got hung with a silk rope" and "To crap on someone's door step is bad enough - but you ring the doorbell - and demand toilet paper." in response to "I don't see why I should pay to have a road, sidewalk, sewer line, water line and storm drains built IN my development - or - "Why cant' I put a "recycling center" (read junk yard) - next to that hospital?"

As for the story - and it's an honest to god true story - these things come out of nowhere and I sort of act like a channel, reading the story as the words and sentences appear on my screen. Some come apparently from my personal experience - some come from I have no idea where. Wish I could start channeling someone like Escoulen, or Pho, or . . . So far - nada.

Re: Answer to: But It Only Took You An Hour To Make

#11

Re: An Old Man, Two Steel Dies & A Drop Forge

matt overton

>Thank you, Charlie. You have brought back the memory of working five summers as a caretaker on an island in Vermont, where I had the pleasure of working with, for, and from one, Egon Mortenson. He was the quintesential "Jack of all trades". I could tell many stories (none as well as you do), but suffice it to say, I learned more from a man who never finished the third grade, and stowed away on a Danish sailing ship to come to this country, than I have in the thirty years since from all the "learned" people in this world. Thanks again.

Matt