Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

lathe tool sharpening

Posts

Re: lathe tool sharpening

#26

Re: 12" disc sander...

john lucas

>I saw a Shopsmith Mark V in the paper the other day for $300. If I had the money I would have bought it. Occasionally they are really useful if for nothing else, a disc sander. A quality sander would cost that much. I remember paying about $1500 dollars for mine back about 1983.

Re: lathe tool sharpening

#27

Re: lathe tool sharpening

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>I, too, use a JoolTool, sometimes, for sharpening. It has the huge advantage of having multiple grits -- as many as you want, really -- instead of, say, just two. Mine go from 60 grit all the way down to 5 micron. And variable speed. Also, you can see the tool edge through the "Ninja" disks as you sharpen. I know many people think it's a toy. But I can assure you that it's a fine, precision, sharpening system. The only problem with it is that it does take a bit of practice to use it. There are no holding jigs, angle tables, etc. You have to do the whole thing "by hand". But once you get the hang of it, it's extremely fast -- and, with , say, a five micron disk, or a diamond disk for some applications, you just can't get as sharp an edge as quickly any other way. ( I have no affiliation of any kind with Jooltool.)

Re: lathe tool sharpening

#28

Re: lathe tool sharpening

tim mathis

>i have been using a leevalley rig for yearsand have found a lot of other uses around the shop for it. after the inital set up , i can sharpen a 7/8 gouge , a 1/2 gouge and scrapers with with no adjustments in between. i also like this method because you can use a honing belt to hone some tools.and the tools are polished and very very sharp, which means the edge lasts longer and less time sharpening tools and more time turning.

tim m.

[IMG]http://i180.photobucket.com/albums/x84/powermatic3520/3sharpenerpix004.jpg[/IMG]

[IMG]http://i180.photobucket.com/albums/x84/powermatic3520/3sharpenerpix002.jpg[/IMG]

[IMG]http://i180.photobucket.com/albums/x84/powermatic3520/3sharpenerpix001.jpg[/IMG]

Re: lathe tool sharpening

#29

Re: Lunch in Leaside...

Ed in Leaside

>Steve, give me a ping any time you're planning to be in the area. I'm rarely more than a few kliks from the shop. Maybe I could arrange to have a little guy with big stick on hand ... :)

Re: lathe tool sharpening

#30

Sorby ProEdge

keith zimmerman, Normal IL

>

Re: lathe tool sharpening

#31

Tim...

Steven Kubien

>...how do you set it up to sharpen a skew?

Thanks!

Steve

Re: lathe tool sharpening

#32

Re: Tim...

tim mathis

>hi steve,

i use the wooden sliding v jig ( one that is in the pictures )for my larger hamlett skew. and another wooden jig ( not pictured )that works with the sliding v jig in the pictures for my smaller skews.