Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Yahoo!

Posts

Yahoo!

#1

Keith Tompkins

Yahoo!

keith tompkins

>I was just notified that a segment I shot for HGTV's "That's Clever" will air on February 16 at 8:00 AM. I showed how I created my "Skippin' School" circle of fish pieces, and a bottle stopper. For the segment, I was required to bring examples of the piece, in every stage of completion.....it took 15 pieces to do this, each side done to a different sequence. The piece required turning ,carving, woodburning, and airbrushing. Over 40 hours of prep time! I turned the stopper on site, one take. The entire shot was planned and scripted; the hardest part was to smile! smile! smile! ARRGGH

I filmed the piece at Brookfield Craft Center in Brookfield, CT, where I am a staff member. Check out their facility!! (Seven One-Way 24" lathes) I hope you check my segment out!

ps: the stopper is now in the collection of a Hollywood producer :)

Re: Yahoo!

#2

Re: Yahoo!

Paul Zerjay

>WTG Keith!! My dvr is already set.

Re: Yahoo!

#3

Good Job Keith- I don't get HGTV-bummer

john lucas

>

Re: Yahoo!

#4

Rob Wallace

Re: Yahoo!

Rob Wallace

>Congratulations Keith!!

Any plans in place to have this turning segment put up on You Tube after it airs?

I've put the day and time on my calendar (assuming that 8 am is EASTERN standard time.....), and hope to be in front of the screen (...since I no longer have a "tube" to be in front of!) to see it!

Thanks for letting us know!

Rob

Re: Yahoo!

#5

Re: Yahoo!

Ralph

>As is mine

BTW, locally (West Coast) that's 5AM, so I might watch it as a prep for the day rather then the news...

Re: Yahoo!

#6

Keith Tompkins

Re: Yahoo!

keith tompkins

>I'm pretty excited, eight hours of work will condensed down to ten or fifteen minutes. It will be interesting to watch. I don't get hgtv either, so my daughter will tape it for me. I'll probably put it on you tube after I get it. My grandsons aren't gonna believe their grandpa is on TV!

Re: Yahoo!

#7

Re: Yahoo!

Texian

>DVR set.

Re: Yahoo!

#8

Re: Yahoo!

Cyril Griesbach

>Good for you, Keith. Too bad we won't be able to see much much more of what was filmed. I'm sure that even non turners who see it will be wishing for more.

Re: Yahoo!

#9

Re: Yahoo!

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Hope you are able to post it on Youtube, Keith, because that is the only way many of us are going to see it! Congratulations!

Re: Yahoo!

#10

Dick Hines

Re: Yahoo!

Dick Hines

>That's great Keith. Now all I have to do is get out of bed in time to watch it. I have it marked on my calendar.

Re: Yahoo!

#11

Steven Antonucci

I'll set the DVR

Steve Antonucci

>

Re: Yahoo!

#12

Congratulations

Mfoster

>That is totally awesome Keith. You have way more patience than I do to turn and carve 15 of your pieces, especially when one considers the time spent carving, painting and detailing on these. I hopefully will get my wife to tape it for me. If not it will be cool to see it up on Utube.

A well deserved moment in the limelight for you.

Mike

Re: Yahoo!

#13

Congrats!

Barry Turner

>I think I saw you at a distance at TAW in Nashville. Then, I heard others from Wood Central were there. I talked to Ruth Niles. Next time we should meet in a group.........

Re: Yahoo!

#14

Keith Tompkins

Re: Yahoo!

keith tompkins

>Thanks, everyone! Just to clarify, Mike, some stages of work were easy....a square blank, then a turned circle, then a bandsawed circle, then carved, sanded, scales applied, holes drilled, etc.. Only the last stages took real time. The good thing is, I had a head start on new pieces. Thanks Bill....BYW, Bill Neddow is know as a bowl turner, but I can assure you he turns a MEAN finial! :) Barry, I wasn't there; I must have a twin. That's too bad, I'm told I have the perfect face for radio, not TV.

Re: Yahoo!

#15

Congrats, Keith! I'll be looking out for it!

david

>

Re: Yahoo!

#16

Outstanding Keith !

Don Orr

>Great for you and for woodturning ! I'm sure you did an excellant job all around.

Do you have an air date yet ? I'll have to keep an eye out for it.

I'd love to take a class at Brookfield someday. I was all scheduled for one on thread chasing a couple years ago but it got cancelled. My nephew lives just up the road a few miles in New Milford.

Re: Yahoo!

#17

Keith Tompkins

Re: Outstanding Keith !

keith tompkins

>Hi Don, Yes, it's Feb. 16 at 8 am. BTW, I ran my woodworking and cabinet business for years just north of New Milford in Kent, CT. Route 7 from Kent to New Milford is a GOOD motorcycle road. See you at Showcase, I hope!