Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Thread Cutters

Posts

Re: Thread Cutters

#26

Re: check your email, Paul

Carol - now back in Dubuque, IA

>

Re: Thread Cutters

#27

Re: John, on your little system,

Al Neighbors

>So that Brass Rod with the Chuck mount on it is threaded. That makes mucho sense to me now. :)

Re: Thread Cutters

#28

Re: check your email, Paul

Paul Waddle

>Thank you Carol,received thread info. pw

Re: Thread Cutters

#29

Re: Paul... where did you learn to...

john lucas

>You can remove some of the slop from homemade nut and all thread drives by slitting the nut and then compress is slightly. Or you can cut the nut in half and glue each half to the wood. Then use screws to tighten the wood so the 2 halves pull the nut in tighter.

I did that when I built my homemade version of the Incra router jig.

Re: Thread Cutters

#30

Re: John, on your little system,

john lucas

>The brass rod is the 16 TPI thread. This is a special type of brass because Vic had expansion and contraction problems with some of the very first models. It seems when you ship units everywhere from a balmy phillipine island to Alaska, things change much more than seasonal Tennessee weather. He found a type of brass that has the same coefficient of expansion as the aluminum he uses for the body. This stopped the problem.

I thought about building a threader, which is why I still have all the info. I had been drooling over the Baxter unit for years since Vic first introduced it. I got a bonus from work just about the time I needed to make some boxes for a client so I jumped on it and made them threaded lid boxes instead of snap fit. It paid for itself in the first year in sales of lidded boxes.

Re: Thread Cutters

#31

Re: 1/4" shank cutter

GalenV

>You really need to look at the 1/4" cutter I sent data on. It will be marginal for cutting 16 thread per inch. The cutter is .072" wide and 1/16 pitch is .0687". The turned down 1/8" shank is either 5/16" or 1" for long cutter and therefore would limit threads you could cut to either depth depending on which length you buy. Cutter is better suited for finner threads.

A larger cutter diameter would sure give more room for adjustment on cutting wood.

With the larger cutter you will need to cut more relief past the threads or grind the outside face of the cutter down.

You got to decide what works best.

I don't want to misslead you on buying a cutter. I know it would not make me or you a happy woodworker.

Galen

Re: Thread Cutters

#32

H ave looked at Al Crandall's jig?  *LINK*

Dave Smith, Longview, WA

>


Lathe Threading Jig

Re: Thread Cutters

#33

Re: Paul... where did you learn to...

Paul Waddle

>Good Idee John. Thats a good way dealing with all thread.pw

Re: Thread Cutters

#34

Re: John, on your little system,

Paul Waddle

>Thats the way to go John. It keeps the economy going and gives a good deal of satisfaction to use a good tool. Besides this,if you wanted to sell it,probably get a least 1/2 of new price. Just try and sell a doit your self item,heck I can't even convince folks that my idea is a good one.free gratis and you can cut several tpi with one set up. ha ha.

I've been experiencing power outages-did yu get my email requesting info on your homemade deep hollow form boring tool? You piqued my interest when you said the bporonmg bar anti turn arrangement need not be as wide as the real torque...... Can't remember the whole statment Elucidate please. I'm Like Al-sounds Greek to me.. ha ha pw

Re: Thread Cutters

#35

Re: Thread Cutters

john lucas

>check out the latest Woodturning design. Spring 2009. Bill Sullivan wrote an excellent article on using the Baxter threader to make a theaded nut and bolt.

Re: Thread Cutters

#36

Re: Thread Cutters

Paul Waddle

>I'd like too,where can I buy this publication?

John,do you think climb cuttin the male thread has any adverse affect on the mesh? I can get around it by starting cutter at the shoulder and turn thread jig backwards,the inside thread presents no such problem.. pw

Re: Thread Cutters

#37

Re: Thread Cutters

Paul Waddle

>John,where can I buy this pub or/could you make me a,copy. Don't want to steal,but unfamiliar with mag. Thaks,pw.