Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

How to emboss wood

Posts

How to emboss wood

#1

How to emboss wood

John Jordan

>look closely.


img

Re: How to emboss wood

#2

hope that wasn't from your motorcycle

john lucas

>

Re: How to emboss wood

#3

Dick Hines

Re: How to emboss wood

Dick Hines

>Motorcycles don't have plates that big and no plate on the front end. Did you get a picture of the car/truck that hit that pole? After thinking about it it must have been a small car/turck because the pole is still standing.

Re: How to emboss wood

#4

He was at a 45� angle to the ground

Ellis Walentine, Host

>

Re: How to emboss wood

#5

Jesper, Denmark

Re: Not exactly, but close......

Jesper, Denmark

>A young man embossed my trailer hitch on his front bumper this morning in a snowy Le�n. I guess they don't have much snow and he did not have winter tires, so couldn't stop as quickly as I could.

The hitch survived - he needs a new plastic bumper.

We parted with shrugs, smiles and two "Bueno's".

Re: How to emboss wood

#6

Oh dear!

Molly Winton

>

Re: How to emboss wood

#7

Truck vs. Tree

GolfSteve in Calgary

>I live across from a slight bend in low speed (60 km/h) road. Twice a year, on average, someone wraps their vehicle around the tree just beyond the slight bend...people just aren't paying attention (or are drunk like the last lady whose ankle was at 90 degrees to her leg when I got to her) and they pile their vehicle into the tree. Most people are speeding on this road, usually around 80 km/h. I'm getting good at being a first responder...and the local 911 operator knows me by name :-(

Anyway, the tree is about 10" in diameter...not very big. I've seen a pickup truck wrapped around the tree. Good thing there wasn't a person in the passenger compartment. I've seen a car hit the tree head on, wrapping the engine bay completely around the tree. I've seen that tree take at least eight direct hits. I've only seen one person with more than minor injuries, a testament to how safe vehicles are in major collisions these days. Almost every vehicle that hits is, I'm sure, written off.

After all of that, the bark on the tree is barely even damaged. Trees trunks are incredibly resilient. I doubt that a pickup truck hitting a tree, even at 100 km/h would do much damage. A dry power pole might be more fragile.

ps. my vehicle lives across the park from the slight bend in the road, so my road has a slight bend also...here's what my car looked like after a hit-and-run with a stolen car and a probable drunk driver. My neighbour saw the guy drift across the road, completely missing the slight bend, and saw hit my car head-on. He walked (or staggered) away and was never found. My neighbour's truck has also been hit once over the years.


The Lucky Tree:


Re: How to emboss wood

#8

Re: How to emboss wood

Bob Macgregor

>I used to live on the outside of a sharp curve on a residential road leading out of the downtown. Soon after the bars closed was the risky time. We lost shrubberies and fence sections and the power pole was dinged, but, thankfully they always managed to miss our two cars in the driveway.

We don't live there anymore.

BOB

Re: How to emboss wood

#9

Chuck Jones - West TN

How'd gee do it?

Chuck Jones - West TN

>When you gonna post the answer to this riddle? I don't wanna miss it. I gotta admit I don't have a clue... but I'm not buying the "truck hit it" routine.

Re: How to emboss wood

#10

Re: How'd gee do it?

John Jordan

>I can't imagine someone going to the trouble of doing it any other way. A plastic bumper would wrap around. But I don't really know- my wife got

it from one of her facebook friends who said it happened in front of their house.

John

Re: How to emboss wood

#11

That's what struck me!

Steven Kubien

>

Re: How to emboss wood

#12

Re: How'd gee do it?

Gary Evans Tallassee, TN

>Hi John,

Looks to me as if the plate had been nailed to the post. Perhaps the swelling and shrinking of the surface as it went from wet to dry over the years created the embossing?

Gary

Re: How to emboss wood

#13

Re:But if it had been nailed to the .......

Jamie D

>....post there would be an obvious difference in surface ageing of the area covered by the plate? I'm still mystified by how the wood could have the same surface appearance yet have the numbers pressed in so uniformly?

Re: How to emboss wood

#14

Steven Antonucci

Upside down, and backwards...

steve antonucci

>If I was "investigating" this, I would note that the letters are reversed (meaning the plate struck the pole face forward) as well as upside down, indicating a rollover?

Surprised that the only trauma to the pole appears to be the "plate impact". I would expect to see some bumper imprint as well. Around here, the poles shear to avoid killing people, so I suspect that this imprint may have been cause by a weird freak combination of events that wouldn't happen again in a million years!

Case closed.

Steve

Re: How to emboss wood

#15

Brad Vietje

I suspect no auto was involved -- just a hammer.

Brad Vietje

>

Re: How to emboss wood

#16

fun with clues *LINK*

John K Jordan

>Curious about where the plate came from.

States tend to stick to the same font for years. For example. TN does not use that type of '4' or '7'. Most do not use that distinctive style of '7' or the '4' with a low horizontal bar. Of the states around TN that I checked, only several regularly used the three letter-four digit pattern.

Could be Ohio. Ohio used the three letter/four digit pattern in 5 of the last seven years. It also is one of the few with a serif on the seven AND uses the style of '4' with the low bar. I didn't even look at the western states.

The first letter appears to be an O, Q, D, or U. The plate number could be something like UTG-8745. The last digit could be a '9' but most states use a "rounder" '9'. Someone with access to the right database and a bunch of extra time could likely find a match and perhaps reveal the story. A photo with better side lighting would help.

The double imprint of the rim at the top and side may be consistent with impact. There appear to be obvious nails on one side but questionable on the other from this photo. The black cable down the side of the photo and the climbing spike divots indicate the wood is a utility pole. What purpose would nail a license plate upside down to a telephone pole at an angle - to make a reflector from the shiny side?

JKJ


img

license plates

Re: How to emboss wood

#17

Re: How to emboss wood

Russ Fairfield

>I remember doing this when I was a kid, just to confuse people. All it takes is a lisence plate, a backing board, a big hammer, and soft wood. It was easier in those days because the plates were made of steel.