Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Serenity Now. Serenity Now.

Posts

Re: Serenity Now. Serenity Now.

#26

Serenity always

Dale Sherman, Manlius, NY

>I've read numerous posts like yours before. I also remember when Bill G. pretzeled his early on. That was enough for me to look at other coring systems. I bit the bullet and sprung for the Oneway. I don't think their cutter design is optimal yet, but at least I can core a set of bowls and stay relaxed while doing so.

Dale, turning frozen wood.

Re: Serenity Now. Serenity Now.

#27

Re: Serenity Now. Serenity Now. *LINK*

Wilford Bickel

>Bill,

I think you have hit the major problem dead on - I have been using the McNaughton Coring device now for several months and it is one of the best purchases I have made for my shop. In addition to getting more bowls out of those "special" blanks and having to clean up less shavings from the floor - it also has made it much easier on the arthritis in my hands it is so easy to use. I believe most turners trouble with this tool comes from the fact that we all are taught from day one to hold the handle of our tools down at our waist so we can ride the bevel. This is just the opposite of what you want to do with this unit as you want to hold the handle up against the cross bar and keep the cutting tip on center. If you let the handle drop you are asking for a bad catch. Keep it up with the tip on center and it cuts so easy I have actually done the trick Bill Grumbine does and held the handle with 2 fingers. If you tried to take my McNaughton corer from my shop, I would fight you for it - probably one of the only tools other than some of my dad's that have sentimental value that I would literally fight to keep in my shop! This unit does have a learning curve so use some cheap blanks to start with so you don't get upset when you release the wood spirit and make a few funnels. Other than that keep the handle up with the tip on center and you will soon be making multiple bowls from a single blank with very little strain on the turner - what more could you ask a tool to do for you??? With my health problems and arthritis I am a prime example you do not have to use brute force to use this tool. In fact in most cases people try to force the tool into the wood too fast and would be better off to slow down the cut.

If you email Kel McNaugton he will give you all the assistance he can on any tool he makes - his customer service is great. His website is listed and you can contact him there.


Kelton Tools

Re: Serenity Now. Serenity Now.

#28

Steven Antonucci

Almost figured it out

Steve Antonucci

>As daunting as the task seemed, I cored 8 bowls in an hour, even working through some screw-ups.

It's still not perfect, but I get closer every time. Need to work out the planning of the cuts better, since I seem to be cutting deeper than it looks when I set up, but other than that, I am slowly becoming a McNaughton fan.