>Looking at the manual for the 1236, I can't see any way to mount an index wheel (or a hand wheel) on the outboard end. Am I missing somethng? (It's the older blue model)
Is there any reason I can't mount an index wheel behind the chuck? Thread length looks sufficient.
I have the article by John Lucas from the archives. I plan on using 1/4" plexiglass and drill holes for the indexing.
>Not familiar with your lathe, but I have used an index wheel mounted on the spindle behind the chuck. In my case it was a degree wheel, so I had to rig a pointer and a friction brake to hold the spindle at each selected point.
>Roger I usually mount my index wheel between the chuck and lathe spindle. I have rigged up an index wheel on the outboard side of a Jet mini lathe. It's been so long since I've seen a Jet 1236 I can't remember how the outboard side looks. Some lathes simply won't take an index wheel on the outboard side. Inboard works just fine.
>I bought one from Alisan ( the universal one that fits on many lathes from 10" to 26" I think./ Since my spindle shaft is 1-1/4" thats the size I got but put a reducing bushing in it to fit my mini lathe, works great also the mounting configurations that you can use with it. The company also makes parts for ornamental MFD turning, the you make it Rose Engine. Not selling anything just putting out info. Take Care. DonL