Looking very good!
Brian Hahn in SW Wisconsin
>I like the abundance of outlets. I did the same thing in my shop.
Knowledge You Can Build On — Est. 1998
Looking very good!
Brian Hahn in SW Wisconsin
>I like the abundance of outlets. I did the same thing in my shop.
Re: I had the same problem.
John K Jordan
>Brian,
Care to share the floor plan the worked. What size did you have and what did you go to?
My plans are still flexible - I plan to divide a 40x48 building to make a vehicle/metal/dirty side and a woodworking side. The woodworking side will be over a basement for DC, compressor, storage, etc. It would be much nicer to change plans now than wish I had later.
JKJ
Re: All very nice - are you going to put them..
Bob Macgregor
>Great shop and nice documentation of the construction and setup.
My question when I saw the first finished inside shot was "is the 220V wired in?" I see later that you decided to surface mount the 220. Was this deliberate or a result of not having a machinery placement plan in advance of doing the wiring?
BOB
Re: Pictures of the new shop
Don at Central Illinois
>Color me jealous! Very, very nice. Now for the next photo's, we need to see somthing you have turned.
Re: All very nice - are you going to put them..
Roger Smith
>Bob, The 220 was wired as following. Three separate 220 circuits were pulled to the corner of the dust collector room. The wires for the dust collector and vacuum pump was then terminated into a surface mounted box near the machine and hard wired without a plug. The wire for the air compressor was terminated in the switchbox on the compressor.
The 220 for the Vega and the bandsaw were pulled to a point above the machine. A drop was made from the ceiling to the back of the Vega with a plug mounted on the backside of the lathe. The drop for the was moved and mounted on the wall instead of the machine. I had intended for the bandsaw to be further away from the wall.
Re: I had the same problem.
Brian Hahn in SW Wisconsin
>My shop and floor plan was in Wood Magazine's "America's Best Home Workshops" 2008 (no longer on the news stands), pages 84-91.
The building is 48x26, the main shop area is 28x25 (interior dimensions). E-mail me if you need a larger image.
Re: I had the same problem.
John K Jordan
>Thank you - that picture is fine.
It looks like you have a combo jointer/planer which saves some space. I'm trying to keep my radial arm saw in addition to the PM66 - this is causing me layout problems - maybe I should just get rid of it. I like the movable bench.
Hard to read but one label appears to say "potters wheel". Do you throw pots? That can take a lot of space (and make a big mess!) A friend here does very large raku pieces and built a separate building just for that. He has several wheels and three kilns. If you are interested in that sort of thing he has pictures on a web site (but unfortunately doesn't work with IE - firefox or safari works fine): http://www.paulmenchhofer.com/workshop.html
JKJ
Re: I had the same problem.
Brian Hahn in SW Wisconsin
>Yes, that's a potter's wheel. I bought it two years ago when I was first learning so I could practice at home. Currently I throw once a week at a pottery studio in Madison, WI. It's a great excuse to make the trip to Madison (50 miles one way) and do my shopping.