Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Workshops

Posts

Workshops

#1

Workshops

Skip Beardsley

>I am hoping to find a two or three day hands on workshop in 2009 somewhere in the northwest. I want to apply for an AAW grant and have to complete application by Jan 15. Primarily interested in bowl turning. Any suggestions? I am looking for intermediate level or higher instruction.

------

Re: Workshops

#2

Re: Workshops

BobM

>Check with Bill Grumbine.

Re: Workshops

#3

Roger Dunn

Re: Workshops

Roger Dunn

>Skip,

The Pacific NW Woodturners Guild will be having another workshop this summer in the Portland. OR area. Doug Brown is the president and you might check the website or inquire about info

http://www.woodturningguild.com/

Re: Workshops

#4

Re: Workshops

Harry In beautiful downtown Kulpsville

>While in Eastern Pennsylvania, you can't do much better than David Ellsworth.

Re: Workshops

#5

Re: Workshops *LINK*

Ed Davidson (Colorado Springs)

>You can search the AAW's Business/Professional online database for schools, workshops and other criteria, by State and keyword via the link noted below. This is a pretty new information resource and might be helpful.


AAW Searchable Resource Database

Re: Workshops

#6

Re: Workshops

robo hippy

>Skip,

Where are you located? I am in Eugene. There are a number of workshops here in the NW.

robo hippy

Re: Workshops

#7

Utah and Colorado classes

phil in NJ

>Hi,

I took Richard Raffan's 5 day workshop at Craft Supplies in Utah. It was fantastic. His tend to focus on a variety of topics, bowls, boxes, etc. Mike Mahoney also does classes there.

Stu Batty teaches in Colorado, contact him via his website at http://www.stubatty.com. As I understand it last I talked to him he had an arrangement with a local Rockler store to do classes there.

I think any of these instructors (in addition to other people's suggestions, but they seem to be east coast people) would be fantastic.

-Phil

Re: Workshops

#8

Re: Utah and Colorado classes

Skip Beardsley------WebKitFormBoundaryAV2aT4d4b2dG

>Thanks for all the suggestions. I think I will try to get into Raffin's workshop in Calgary. It is the closest to me here in Whitefish Montana. If that doesn't work I will check out some of your suggestions

Skip

Re: Workshops

#9

Re: Utah and Colorado classes

Fog Tanner

>I had a one day workshop with Richard and gained some skills from it. Four years later I went to a five day course at the Craft Suppply classroom in Provo. That five days advanced my knowledge by five years. I am planning on making the 1600 mile drive from Texas again for another one with him. That says something about the class when you are willing to drive 3200 miles just to turn wood. There are still some areas that I want to work on. In the class I was in, everyone had there own goals and expectations. Richard was able to keep track of each of us and point us in the right direction. We all had 24" lathes to work on, so size or power was no problem. They have a really first class setup.

It is really more of an experience than just the turning during the day. There is a good discount for the hotel thanks to Craft Supply, so everyone stayed there. In the evenings we would walk across the street or drive down the road to a resturant and all eat together. It was great getting to know folks from other parts of the country and Richard had some humerous stories about his travels.

Fog

Re: Workshops

#10

Re: Utah and Colorado classes

JohnKyler

>I was up in Kalispell last month teaching (not woodturning)......

But the flight is direct from Denver, Stu Batty does teach all over the country, but he reserves/rents the Denver Rockler shop once a month. His classes are great and you can pick up more information than can be absorbed in a short time.

John