Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Sugar maple bowl with "features"

Posts

Sugar maple bowl with "features"

#1

Sugar maple bowl with "features"

Dave Mount

>Hello all--

Up until recently I've resided mostly on the hand tools board, but lately I've been lurking around here. I bought a Delta midi lathe this spring, mostly to make tool handles, but I've done a little experimenting with bowls. I haven't had any in-person instruction, but I bought Bill Grumbine's first video and made some. . .er. . ."learning opportunities". Anyway, this is bowl number 12 or so and although the bowl oculdn't be simpler, I thought the piece of wood was interesting.

Our family has a 3000-tree maple syrup operation here in northeast Minnesota. We've been experiencing some maple dieback and the dying/dead trees get cut for firewood. This is a piece of one that I pulled from the firewood pile. The dark circles are old boreholes from being tapped. They are actually holes in the raw wood, but I filled them before final turning with epoxy and coffee grounds (a tip I learned lurking here). The streaks are staining that spreads above and below the tap holes. The streak on the right was presumably from a hole just outside the blank.

Bowl is 8" in diameter, 2.5" high and the walls are about 5/16". I've struggled to go much thinner than that because of chatter when working the rim. Finish is Shellawax cream -- I don't have a buffing system so that seems a quick solution. My midi is too short for a Beall arbor and Delta has quit selling the bed extensions for it (anyone got one they want to sell?).

Apologies for the flash photography.

Best,

Dave


img

Re: Sugar maple bowl with "features"

#2

Re: Sugar maple bowl with "features"

Brian Simmons, Heflin, AL

>Nice wood, nice looking bowl, remember thinner is not a key of quality. It is all about balance and what works for the piece of wood.

You should consider supplementing the syrup business by making bowl blanks. Sell a few on ebay and start feeding the new lathe adventure.

Re: Sugar maple bowl with "features"

#3

Re: side view

Dave Mount

>This shows the profile. It's interesting, the little tips you can see on the inner ends of the tap streaks are actually the shadow of the tip of the drill bit. Funny how that level of detail is retained. The "stand" it's sitting on was the first in the "holy maple" series, and also my first experience with shellawax cream. You can see some residual turning marks on the bottom one, it is where I learned that Shellawax is a particularly unflattering finish for anything that hasn't been sanded perfectly. The marks aren't nearly as obvious when viewed in hand as they appear in this pic but live and learn. Guess I should have cropped them out of the pic!!

Best,

Dave


img

Re: Sugar maple bowl with "features"

#4

Re: side view

Ed Larson

>Great bowl, great wood and great story. I agree with Brian, start selling blanks. Looks like you have been infected with the woodturning virus.

Re: Sugar maple bowl with "features"

#5

Re: Sugar maple bowl with "features"

Barry Elder

>My two cents! Sugar maple is too good to be burned! Ship it to Florida to turn in the sunshine! Ha!

Re: Sugar maple bowl with "features"

#6

Re: Sugar maple bowl with "features" *LINK*

John K Jordan

>>The dark circles are old boreholes from being tapped.

Wow - homemade ambrosia! That's a dynamic effect.

I'll bet you could sell a bunch of sugar maple blanks, especially if they are big. What kills is the shipping - people who would buy are often not next door but live where such wood doesn't grow. Carry a load to a symposium? Ship a truckload to a wood dealer? Once a guy from Florida brought a big supply of wood from his area to the Knoxville woodcraft store and swapped even for wood from this area.

We have plenty of red/sliver soft maple around here but not so much sugar maple. I love small pieces for spindle turning and boxes and such (even without the streaks) if you are interested in trading a little for some TN wood. The post office flat rate boxes are pretty economical.

Beall also has the wheels separately which has some advantages and doesn't need a long bed. I bought a separate MT mount for each wheel to save time, although I've also started using a wooden wheel mount that Frank Penta showed me how to make which moves the wheel further from the headstock. The separate wheels allow more working room which is handy for larger pieces. A lot of time I use only the wax wheel anyway. The three individual wheels take less storage space too! (I think buffing wheels need to be stored in a cabinet or bag or otherwise protected from incidental contaminants.)

BTW, I think the flash photography is fine. I'd far rather see a flashed photo than no photo! Besides, this is not a photography forum.

JKJ


buffer thread

Re: Sugar maple bowl with "features"

#7

Re: Sugar maple bowl with "features"

Jim Shaver - Oakville, Ont

>Nicely done Dave,

Hope to see you on both pages,

Take care,

Jim

Re: Sugar maple bowl with "features"

#8

Re: Sugar maple bowl with "features"

Texian

>Dave,

You have a future as a bowl turner. You have the all the necessary resources readily at hand. Save those maple trunks and buy some fire wood. Good looking bowl. And 5/16"-3/8" (as mentioned) is an ok thickness for that type of bowl. Much thinner than that and the piece often does not "feel right" in the hands. Good luck.

Re: Sugar maple bowl with "features"

#9

Chuck Jones - West TN

Re: Sugar maple bowl with "features"

Chuck Jones

>Thanks for sharing the photo and the story. Both are great. I've been over much of the USA but never to a maple syrup operation. Can't imagine maintaining that many trees.

Re: Sugar maple bowl with "features"

#10

Re: Thanks all

Dave Mount

>Thanks everyone for the kind words and encouragement. I look forward to continued learning from all of you.

Best,

Dave