Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Bed Extension plans?

Posts

Bed Extension plans?

#1

Bed Extension plans?

Philip Duffy

>Anyone built an extension for their lathe bed? A buddy of mine needs to add about a foot for a one of a kind piece that will not be done again. If you have any plans on how to add a foot to 2ft onto the end of the lathe rails I would love to see them. Many thanks. Phil

Re: Bed Extension plans?

#2

Re: Bed Extension plans?

Ed in Leaside

>I've made, IIRC, 3 of them. All of them had the lathe and extension mounted on a sub-bed of some sort. The first sub-bed was just a couple of 2x6 x8' bolted under the lathe and hanging out the end. Bolt your extension to that. Here is a pic of my latest, and hopefully last, version.


img

Re: Bed Extension plans?

#4

Re: Two questions?

Bob Macgregor

>Ed,

Is that a mouse exercise wheel on the lathe bed?

Why is the emergency stop button on the backside of the lathe?

Just curious.

BOB

Re: Bed Extension plans?

#5

Re: Two questions?

Ed in Leaside

>Yes that is a mouse/hamster wheel. I jokingly call it my alternate emergency power source. I really should get a bigger wheel as there's quite a few racoons hanging around the building. ;)

The emergency stop button has a magnetic base and just gets placed wherever is convenient.

Re: Bed Extension plans?

#6

a simple welded solution

Robin Corell in Atascadero CA

>The shop tech at San Jose State made one of the cleanest and simplest extension set ups I have ever seen. Unfortunately I don't have any pictures. The extension is a piece of thick wall 4x4 metal tubing welded to a piece or plate and bolted to the ground. on the top or the tubing is a rectagular piece of plate that is the same width as the bed and about 12" long. on top of the plate are welded some pieces of bar stock and some spacers to simulate a 12" length of the bed. In use there are a series of threaded inserts in the floor so that the bed extension can be bolted to add as litle as 12" or as much as 4'by moving only the tailstock. A free standing tool rest is used. I saw an 8' post turned on this set up.

Robin