Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

If You Could....

Posts

If You Could....

#1

If You Could....

Wally Dickerman in Arizona

>spend a day with another turner in their shop/studio, who would it be? Name two.

I think that my choices would be Terry Scott in NZ and Binh Pho. Before he died, Frank Sudol would have been on my list.

This question has been asked before and it got some interesting answers. Lets do it again....

Wally

Re: If You Could....

#2

Re: If You Could....

Raymond Overman in SC

>Clay Foster and Graeme Priddle

Re: If You Could....

#3

Steven Antonucci

Marc Ricourt and Alain Mailland

steve antonucci

>No wait! Mark Sfirri and Escoulen.

No wait! AAARgh (pop) The sound of my head exploding...

It would have to be someone who did something so incredible that no amount of staring at their work would allow me to figure out how they did it. I am baffled by 3 of the 4 I mention as to their method of work (Marc Ricourt's stuff I just like a lot...)

Restricting the list to just two makes it really hard, but I bet that my "big list" is probably very different than most people's...

Steve

Re: If You Could....

#4

JoHannes Michelson and Doug Thompson

Greg Haugen

>I can't wait until Nov. since I do have a chance to do some turning with JoHannes when he comes to MN. I'll be there for the one day demo followed by the one day hands on class. It will be a great time. My other choice is Doug Thompson. It would be very interesting, I think, to spend a day with him as he is involved with the tools and to see everything that goes into them. Even though I haven't ordered directly through Doug, I have three of his tools. A 3/8" detail gouge, a gift from Bob Rosand- another friend of mine just ordered one from Doug since he (Bob) liked mine so much, and two HannesTool gouges. Doug's tools are the Best tools available, Period!

If I could add a "non-turner", hands down it would be Sam Maloof. An Icon in American Woodworking.

Greg H.

Re: If You Could....

#5

Re: If You Could....

john lucas

>That's a tough on Wally, there's so many people I admire both their work and their personality. That would include you and Russ and Bill and many others from this group. I spent a weekend with Frank Sudol and Micheal Hosoluk and was fortunate enought to spend a week with Binh Pho. Incredible experiences.

After much rattling around in the empty space I call my head I would have to say Stephen Hogbin and Mark Sfiri. I've alsways been fascinated by original offcenter work and they are two of the best.

Re: If You Could....

#6

Eli Avisera and Hans Weissflog for

Ed Moore in SW Virginia

>boxes/spindle work and Bert Marsh and Bill Luce for pure bowl turning. Ray Key always praises Bert Marsh for his bowl shapes and I like the shape that Bill Luce gets in a bowl.

I think that Eli and Hans are remarkably clever.

Ed

Re: If You Could....

#7

Re: If You Could....

Carol - now back in Dubuque, IA

>Putting this in the realm of woodturners I have not yet spent some time with, I'd have to say John Lucas and Mike Stafford. Otherwise, my friend, you are number one in my book.

Now, in all fairness I have spent a little time with John, but not in his shop. I love his innovative mind.

And, in all fairness to Mike, I will be in attendance at his workshop in two weeks in Wisconsin. So, one out of two in the near future is pretty darn good!

Re: If You Could....

#8

JL

Wally Dickerman and Nick Cook...

JL

>Richard Raffan would be nice too.

Re: If You Could....

#9

Re: If You Could....

Stuart Johnson

>You, Wally for hollow forms and Bill Grumbine for bowls.

Re: If You Could....

#10

Andi Wolfe $ Escoulen

Jorge Castaneda ~ Downeast Maine

>

Re: If You Could....

#11

Re: If You Could....

arkie

>If I could turn back the calendar, Rude, turning anything he wanted.

Of those alive today, Wally, doing beaded bowls and hollowforms, Rosand, doing his small items.

All 3 cases where I'd expect to get as much from the company and conversation as from the turning.

Re: If You Could....

#12

Re: Jimmy Clewes & Richard Raffan

Harry In beautiful downtown Kulpsville

>

Re: If You Could....

#13

Jimmy Clewes and Sarah Palin

Mike Jones, Redding, CA

>

Re: If You Could....

#14

Re: Giles Gilson

Russ Fairfield

>

Re: If You Could....

#15

Richard Raffan and Escoulen

Fog Tanner

>

Re: If You Could....

#16

Re: If You Could....

Allen Neighbors

>You, Wally. You say things that make me want to meet you. And your woodturning is impeccable.

Second choice would be Carole Valentine. My lacquer wash came from her (as far as I know). I love her eye for form in the hollow forms she turns.

Next choice would be Terry Daniel, because I learned a bunch from him when I was at his place in 2005.

Then I'd like to get some time with Chris Ramsey. He's a gutsy turner.

Re: If You Could....

#17

Easy...

Molly Winton

>Ruth Niles and Jennifer Shirley....if I can only have two, but if I want to make it a party I'd also invite Mac Ray, Pete Kekel, Russ Fairfield, Carole Valentine, and Barbara Gill. They're my buds, and I miss them.

Re: If You Could....

#18

Just two?!?!?!

Steven Kubien

>Wow Wally, that's a pretty tall order. I suppose the two would be Bill Neddow for his incredible eye for form and graceful lines and Richard Raffan for "you do that how quickly?!?"

If I was able to broaden things a bit, Mike Stafford, Bill Grumbine, you Wally, Molly and her burner and someone who turns in a traditional Japanese style because it looks so cool!

Can I add Jimmy Page because I bet the tunes in the shop would be incredible? Not sure if he turns but if not, I would volunteer to bring my lathe. :)

Cheers,

Steve Kubien

Re: If You Could....

#19

Jaques Vesery and Art Liestman

mfoster

>

Re: If You Could....

#20

Tough Call

Don Orr

>There are so many I'd like to spend time hanging out with. I've seen a few of the "names" at different events. I think high on my list would be Russ Fairfield and John Lucas. The variety and diversity and depth of their knowledge and skill is something that appeals to me.

Re: If You Could....

#21

Re: Easy...

Barbara Gill, Remlik VA

>Awwwwwwwww that is sweet!

Re: If You Could....

#23

Jim Davis & Keith Hughes. NM

Atwerz

>

Re: If You Could....

#24

Re: If You Could....

JohnKyler

>Well..... A day with my Dad and my Daughter on my PM4224 and her 1014vsi. All three of us would be a good time.

Now for others: Stuart Batty, Ernie Conway, Allan Batty, Richard Raffen, Keith Gotshel, Megan Cain.... Oops too many..

John

Re: If You Could....

#25

Ed Koenig and Ed Kelle

Cyril Griesbach

>