Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

New work- Meteor No. 1

Posts

New work- Meteor No. 1

#1

Steven Antonucci

New work- Meteor No. 1

steve antonucci

>This is a somewhat new direction for me. I will say that it represents the most work I've ever put into a single piece, and I feel it is the best thing I've ever made.

It is about 12" wide by 5" tall, and represents a Meteorite as uncovered from the Earth. It required 2X work off of the lathe as it did on the lathe, but there's still an awful lot of hours spent spinning...

Comments welcome.

Steve


img

Re: New work- Meteor No. 1

#2

Re: New work- Meteor No. 1

Don at Central Illinois

>I like it. It is unusual from your past posts, but that's what's fun, trying new things. Don't know if I have the patience to spend that much time, though. Good job.

Re: New work- Meteor No. 1

#3

Re: New work- Meteor No. 1

Douglas

>Very Unique and I like it.

Re: New work- Meteor No. 1

#4

Re: New work- Meteor No. 1

Michael Stafford

>Steve, that is quite a wonderful piece of work and involves much patience and skill. I like it a lot and will enjoy seeing where this line of work takes you. Good stuff!!

Re: New work- Meteor No. 1

#5

Dick Hines

Re: New work- Meteor No. 1

Dick Hines

>Steve, I guess this piece could be classified as a simi hollow form.

I like it.

Re: New work- Meteor No. 1

#6

Steven Antonucci

"turned on 520 centers"...

steve antonucci

>is my standard joke for introducing the piece to people (Woodturners, not regular people :-)

Thanks for the positive feedback. I think that quite a bit more of my future work will be "sculptural" like this one... it's too much fun, I get to sit in a chair while I'm doing it, and it doesn't require any sanding!

More to come...

Steve

Re: New work- Meteor No. 1

#7

Re: New work- Meteor No. 1

Texian

>Very striking indeed! Am curious about how you got the idea to do a "meteor form".

Richard in Wimberley

Re: New work- Meteor No. 1

#8

Meteorite No. 1, not Meteor

adrien------WebKitFormBoundaryCYgCTS8iAM5FYG+w

>

Re: New work- Meteor No. 1

#9

Steven Antonucci

You are correct sir

steve antonucci

>If I found it on Earth... :-)

Steve

Re: New work- Meteor No. 1

#10

Steven Antonucci

Since you asked...

steve antonucci

>I think it's a somewhat involved story... and involves some well known names.

About a year ago, Keith Tompkins and I were sitting at dinner at Totally Turning with Ron Sardo, Andy DiPietro, Terry Fox and a couple of other guys when we got onto the subject of inspiration for our work. Keith explained that he was an avid fisherman, and that led to his pieces with the fish eating each other. He said that until you put something bit of yourself into your work, it will always be missing something. (Stored that away for later)

Six months ago, I was talking to Harvey Fein at a club meeting and I had a bunch of small hollowforms with me. He made a comment to me that I "did David's (Ellsworth) work well", which caused me to visibly flinch. I asked him to expand upon what he meant, and he basically said the exact same thing Keith did. I sought a second opinion...

I sent a picture of the work in question to David Ellsworth, and sought his view of the situatiom. He responded that he thought Harvey was right, but it was not a big deal. He also made the comment about putting personal experience into the work and how it was the hardest thing to do...

So, I wanted to do something that reflected upon what I am interested in (now) that might reflect my passion for something other than turning. I have a million fleeting interests, but the one that jumped out and hit me over the head was astronomy!

It just came to me one starry night on the deck with my telescope. I grew up a fan of sci-fi, and can still remember the little dance I did the first time I saw Andromeda or Saturn (or any of the things that I find). It's a sense of never-been-here-before, overwhelming reality of how small we are, and the fact that there is no possible way that we are alone- all rolled up into one stupendous sense of awe.

I knew I had all of the building blocks to pull this off. I was one piece short in the puzzle, but it turned out to be "Googleable". When you have the last piece, you just need to set out on the journey- no matter how long it takes.

Thanks for asking

Steven

Re: New work- Meteor No. 1

#11

Re: New work- Meteor No. 1

david

>Steve:

Good form counts for a lot. No matter how you embellish it, the good form you created still shines through.

Re: New work- Meteor No. 1

#12

Re: New work- Meteor No. 1

Jerry McCaffrey

>Do you have to sharpen a lot on the Tormek when you are turning iron? Also, maybe you should put on a protective finish, it seems to be rusting quite heavily since I saw it last. Some Rustolium spray paint would probably take care of it nicely. You pick the color, but pink would probably make it really unique.

Jerry

Re: New work- Meteor No. 1

#13

Re: "turned on 520 centers"...

Don in Ellensburg,WA,

>Try some of that instant rust slolution on the next one then you will really have a chunk of iron!

Re: New work- Meteor No. 1

#14

Steven Antonucci

Is Pink Rustoleum compatible with Ironwood.

steve antonucci

>From Holy-wood, of course... ;-)

Funny you should mention it, though- I was going to make another post about what happens when Thompson skew runs backward into a Nova Chuck Jaw at 1500 RPM... It cuts the jaw almost in half! (The skew was completely unharmed...)

So to answer your question, if you have a Tormek and Thompson tools, you don't need to sharpen them all that often.

Steve


img

Re: New work- Meteor No. 1

#15

Re: Since you asked...

Texian

>An interesting and thought provoking story. Thanks Steven!

Richard in Wimberley

Re: New work- Meteor No. 1

#16

Re: New work- Meteor No. 1

Don Orr

>That's wild Steve !! Definitely "out there" in a good way. Really an excellent piece in many ways. The story also helps put it all together. I also look forward to seeing where this expedition takes you. Maybe where no woodturner has gone before ?

Re: New work- Meteor No. 1

#17

Keith Tompkins

Re: Since you asked...

keith tompkins

>You are on your way, my friend! Enjoy your voyage throught the universe!! LOL Neat piece!

Re: New work- Meteor No. 1

#18

Re: Is Pink Rustoleum compatible with Ironwood.

charlie belden

>and when you get the smaller and closer together you can eventually get an emperor or two to pay you a small fortune for something so delicate that you can't even see it ; )

Making holes is easy. Making a bunch of them close together - and not have one cut through into an adjacent hole - not so trivial.

Re: New work- Meteor No. 1

#19

Steven Antonucci

Having punched through 3 times...

steve antonucci

>and rebuilding the mistake with epoxy and shavings, I am glad that paint covers all ;-)

S