Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

NIP can be messy work...

Posts

NIP can be messy work...

#1

NIP can be messy work...

david

>Checked out the local greenwaste facility from a club Wood Alert, and found some smaller pieces for a change; freshly cut. This pile is from a single length near the top of the tree, 5-1/2" dia. at one end and 9" dia. at the large end. The messy part is dealing with the sap from the cambium layer. Difficult to remove completely before mounting on the lathe, and the stickies can get all over the place. I've seen the sap volume worse--guess it depends on the time of the year when the tree is felled. Must be at least 6-8 calabashes in that pile;-).


img

Re: NIP can be messy work...

#2

Re: NIP can be messy work...

Ron McKinley

>Didn't realize NIP was that sappy! Do you turn it green or let it dry first? .......Ron

Re: NIP can be messy work...

#3

Re: NIP can be messy work...

Barry Elder

>Yeah, it's that sappy! After the hurricanes of 2004, I helped cut up and store some NIP on my back patio. Later, when I started to move the pieces, I had to use a crowbar to break it loose! Now I let dry out on the horizontal!

Re: NIP can be messy work...

#4

Roger Dunn

Re: NIP can be messy work...

Roger Dunn

>David,

I've turned Monkey Puzzle which is a cousin of NIP. It is really messy and the best method I found to deal with it is to stand the rounds on end and then slice away all bark, sap and gunk with vertical cuts - voila! no mess in the shop. I tried peeling the rounds with a bark spud but it was too messy.

Roger Dunn

Re: NIP can be messy work...

#5

Peter Charles Fagg (UK)

Re: NIP can be messy work...

Peter Charles Fagg (UK)

>Please can someone inform me as to the name of this timber, NIP is an unknown, it looks very interesting though!

Is it as sticky as it looks?

Regards, Peter,

Re: NIP can be messy work...

#6

Steven Antonucci

Norfolk Island Pine

steve antonucci

>

Re: NIP can be messy work...

#7

NIP turned wet

david

>This is before spalting occurs. Stains can begin to develop within a week after the tree is cut down.


img

Re: NIP can be messy work...

#8

NIP with spalting

david

>This piece was probably turned about 6 months after being cut down. Depending on the conditions, can start to turn punky after 4 months. Staining can be dark blue to almost black.


img

Re: NIP can be messy work...

#9

Peter Charles Fagg (UK)

Re: Norfolk Island Pine

Peter Charles Fagg (UK)

>Thankyou Steve, I should have guessed really!!

Regards, Peter.

Re: NIP can be messy work...

#10

Wet work can be messy!!!

Michael Stafford

>David, it is time for a plastic picnic table cloth as a turning smock, a full faceshield with wipers and some solvent to clean the lathe....

Re: NIP can be messy work...

#11

Re:Aahhh, the wonderful smell of .....

Jamie Donaldson

>turpentine in the air! Take me back to ............cleaning pine sap off my tools,lathe,clothes,hair,....................!