Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Anyone turn left handed

Posts

Anyone turn left handed

#1

Anyone turn left handed

Rik

>Greetings everyone,

Does anyone solely use their left hand to turn? This past weekend I re-injured my right elbow losing more strength in that arm and have been told it may take up to a year to heal.

Because I can't safely hold turning tools with my right hand I'm considering using my left. I've always used either hand depending on the cut needed but have primarily used my right. Is it possible to only use my left hand? One concern I have is that it would adversely effect my technique.

Re: Anyone turn left handed

#2

Re: Anyone turn left handed

Donna Banfield

>Rik, sorry to hear about the shoulder injury. As someone who is prone to repetitive motion injuries, I feel your pain.

You can do it. If you've turned with your left hand in the past for some cuts, I think you could probably teach yourself how to turn with your left hand. Like you, I've done some cuts using the left hand as the controlling hand, because it was a better angle. I also taught myself how to throw my dogs' frisbees and tennis balls (using one of those plastic arms that fling the ball a hundred yards or more), when I aggravated tendonitis in my elbow.

Consider the experience another woodturning challenge, like learning to use another tool, like the skew chisel.

When you first started turning, you probably didn't pick up a gouge and produce a David Ellsworth or Binh Pho duplicate. You learned how to use the tools and how they cut, and what NOT to do. So you'll do the same thing with your left hand, but hopefully the learning curve won't be as long and steep this time around because you've already learned a few of the tips/tricks.

Re: Anyone turn left handed

#3

Re: Anyone turn left handed

Barry Elder

>While moving to the other side of the lathe is foreign to many turners, at times it can be like taking a basic lesson or a refresher. I turn from both sides and while it is a little odd to begin with, it goes away when the long shavings start flying. Requires a little extra concentration and focus but if necessary, as in your case, it should be second nature in a short time. And in some cases, depending on which is your master eye, you can see better!

Re: Anyone turn left handed

#4

video of left handed turner?

phil in NJ

>Hi,

Just a thought... would it be worth getting a video of a left-handed turner (like Mike Mahoney)?

-Phil

Re: Anyone turn left handed

#5

Re: Anyone turn left handed

robert davis

>i am left handed tho somewhat ambidexterious..and turn mostly with left hand. could turn only with left if needed. good luck

Re: Anyone turn left handed

#6

Re: Anyone turn left handed

Wally Dickerman in Arizona

>Rik, every bowl turner should be ambidextrous with the bowl gouge. Aside from that, you can easily adapt your gouge technique to using your left hand to hold the tool while keeping the right elbow tucked in to your side, which you should be doing anyway. That will minimize the use of the injured right elbow. By learning the push cut and the pull cut you can handle any cut needed on the outside of the piece. You might find it easier to use this method by hollowing the bowl from the back of the lathe. Some turners actually prefer to use this method.

If you happen to have a lathe with a sliding or swiveling headstock, then just face the piece and keep the right elbow tucked in.

I'm left handed, but I can turn equally well using the left or right hand. With practice, you can too.

Good luck,

Wally

Re: Anyone turn left handed

#7

Re: Anyone turn left handed

Harry In beautiful downtown Kulpsville

>Bob Rosand is left-handed too.

Re: Anyone turn left handed

#8

Re: Anyone turn left handed

Rik

>I didn't think about the eye. My left eye is dominant which is why I shoot a bow left handed.

Re: Anyone turn left handed

#9

Re: video of left handed turner?

Rik

>Excellent idea. I believe I have one of his videos.

Rik

Re: Anyone turn left handed

#10

George Taylor

Re: video of left handed turner?

George Taylor

>Bob Rosand is also left handed and he is featured on at least one AAW video/DVD.

George

Re: Anyone turn left handed

#11

Re: Anyone turn left handed

Rik

>Thank you everyone for the excellent suggestions!

Rik