Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Ed Moore's box....

Posts

Ed Moore's box....

#1

Mike Stafford

Ed Moore's box....

Mike Stafford

>Here is a little box I left with Ed Moore turned from some curly big leaf maple and a mallee burl inlay. A friend from another forum donated the mallee burl. The box finished up at 2 3/4" in diameter and 2 1/4" tall. The lid is a little loose on this one but not every box is going to be perfect. I hope that Ed will forgive me on this one.

All comments appreciated...


img

Re: Ed Moore's box....

#2

And it is right next to the tulipwood box ...

Ed Moore in SW Virginia

>shown below and Ray Key's three tier pagoda box that I got when Ray demoed at Smith Mountain Lake Woodturners. It's a really nice box, different in style from those I make, and it is clearly one of Mike's.

Thank you,

Ed

Re: Ed Moore's box....

#3

Very nice... even without the bead ;-)

david

>

Re: Ed Moore's box....

#4

Ric Taylor

Re: Ed Moore's box....

Ric Taylor

>Mike,

Very nice box, I like it. There isn't any rule that says box lids have to be tight, it is just a preference that most turners have. Many turners leave them loose intentionally, especially when they are gifts for non-turners so that there are no spills when they are opened.

Ric