Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Router speed controller on Jet Mini *LINK*

Posts

Router speed controller on Jet Mini *LINK*

#1

Router speed controller on Jet Mini *LINK*

Frank Wilhelm

>All:

Can one use a router speed controller - I'm thinking of the speed controller for up to 3 1/4 hp routers offered by MLCS (see link below) -

to add variable speed to a non-variable speed Jet Mini? All insights, pros/cons appreciated. Thanks.

FMW


MLCS Router Speed controller

Re: Router speed controller on Jet Mini *LINK*

#2

Jesper, Denmark

Re: Router speed controller on Jet Mini

Jesper, Denmark

>Routers use universal motors. The Jet Mini is probably a standard squirrel cage electric motor, so it is not likely to work.

You need a VFD for the Jet.

Re: Router speed controller on Jet Mini *LINK*

#3

Re: Router speed controller on Jet Mini

TomCollins

>I asked this question on another forum a while ago and was advised it would not work. There is a difference in the types of motors as mentioned above and the router controller will burn up the lathe motor.

I ran across another post yesterday that mentioned using a motor off a tread mill on the Jet mini's. I guess at one time one of the woodworking suppliers was selling motors off tread mills for that purpose. Don't know how well it worked but sounded interesting.

TomC

Re: Router speed controller on Jet Mini *LINK*

#4

NOPE

Ralph

>Jesper is right, doesn't work, wrong kind of motor

Aside, this question gets asked, a lot, if someone is ever putting together a woodturning FAQ, consider adding it

Re: Router speed controller on Jet Mini *LINK*

#5

Re: Router speed controller on Jet Mini

Mike from St. Clair Shores

>Frank,

Penn State industries has a motor , controller and all the necessary hardware for under $100. That may seem a bit much for some budgets, but was well worth it when I got mine for $89 and free shipping. All lathes should come with variable speeds.

Mike

Re: Router speed controller on Jet Mini *LINK*

#6

Re: Router speed controller on Jet Mini

eaglesc

>The problem with the PSI conversion kit is the slowest speed only drops to 700 RPM IIRC.

530 rpm on a stock unit is too fast for some operations.

It's a shame when someone designs a conversion unit with a clean slate and they screw up right off the bat.