Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Turning a Sphere - Video *LINK*

Posts

Re: Turning a Sphere - Video *LINK*

#26

Re: Disconnect

James McClure

>Hope these help.


img

Re: Turning a Sphere - Video *LINK*

#27

Re: Disconnect

James McClure

>I wish that guy in the front row would have moved his head. :-)

Re: Turning a Sphere - Video *LINK*

#28

Oh, So

Mark Mandell - Gone Round In Jersey

>No tailstock and the only thing holding that piece into the block is:

a. Having be beat in with a large mallet while hoping the block didn't split

b. Having been glued in when others weren't looking

c. A hidden vacuum pump the noise of which spectators put down to questionable bearings in the Oneway

d. Dark magic

I see it being done, but you can bet I would not have been sitting anywhere near the Throw Line. |;-}}}}}

Re: Turning a Sphere - Video *LINK*

#29

PS

Mark Mandell - Gone Round In Jersey

>Thanks Jim!!!

Re: Turning a Sphere - Video *LINK*

#30

Exactly!

James McClure

>

Re: Turning a Sphere - Video *LINK*

#31

Steven Antonucci

I do this all of the time, Mark

steve antonucci

>I have mad a couple of scoops, and I don't use a mallet to whack it in, just some hand pressure. I'd say my biggest fear isn't being struck, but actually getting the scoop out without breaking the handle off. Mind are typically pretty small compared to these pictures, and the handles are 1/4' or so at the narrowest feature.

It holds pretty darn good.

Steven

Re: Turning a Sphere - Video *LINK*

#32

Re: Donut/Compression Chuck *LINK*

Bob Macgregor

>I knew I had seen that scoop demo somewhere before. Try the Soren Berger scoop video on the Woodworking Channel's AAW section.

BOB


http://www.woodworkingchannel.com/dolphin/vidego_video_library.php