Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

How Many Turning Tools Do You Have?....

Posts

Re: How Many Turning Tools Do You Have?....

#26

Re: How Many Turning Tools Do You Have?....

Ed Karch

>Probably under 100 but no Thompsons yet. I hope to remedy that in Richmond in less than 2 weeks.

Re: How Many Turning Tools Do You Have?....

#27

WAY TOO MANY!!!!!!!

James McClure

>

Re: How Many Turning Tools Do You Have?....

#28

I have a lot but...

Don Orr

>...not as many as some of the responses ;-))

I have several bowl gouges, spindle gouges, skews, scrapers, hollowers. Some of these I made my self. I have a bunch of Craftsman tools that came with a lathe. I have the crappy steel tools that I thought were good when I started. I have a McNaughton center saver with a couple sets of knives. I even have some tools that are still new in the packaging that I got at a real good price. These will replace the ones currently in service as they wear down.

I have enough tools to have a "travel" kit and still have what I use the most at home. I even have the vacuum gouge from Clean Turn Tools that I love-it works great especially for roughing out in spindle orientation.

I probably use most of what I have in my racks. You know, I use hollowing tools when hollowing, bowl tools when turning bowls, spindle tools when working in spindle orientaion. I mix and match as needed.

Re: How Many Turning Tools Do You Have?....

#29

Re: How Many Turning Tools Do You Have?....

Bruce Lane

>Would that be before or after I score some Thompson gouges for Father's Day?

Re: How Many Turning Tools Do You Have?....

#30

Re: You Take The Prize.....

Don at Central Illinois

>Yeah Wally, but that's like golf. You use ALL the clubs you have, not just one or two.

Re: How Many Turning Tools Do You Have?....

#31

Re: How Many Turning Tools Do You Have?....

John K Jordan

>I see 62 turning tools with handles used while the work is spinning, 13 without handles, 8 used while work is stationary, 10 supernova chucks, 22 tools to gauge and measure with, two lathes, one bandsaw, and 4 things motor driven abrasives to make things sharp.

Of course some are used far more than others, maybe 5 haven't been used for 3 or more years.

JKJ

Re: How Many Turning Tools Do You Have?....

#32

Re: How Many Turning Tools Do You Have?....

charlie belden

>Do you mean "with individual handles"?

With a single or double ended handle and gouges and chisels that fit into it - are the gouges and chisels each a turning tool and how do you count the handle.

Does an "insert tool" with three "inserts count as one, three or four turning tools?

What about a "captured system"? Do they count as one, and, if not, do the 3/4" and 1" diameter "shafts" each count? What about the rest of the "captured system" parts?

Do chucks count - and does each set of jawscount individually?

Thinking about it, I'd previously thought that a router, router table, fence system - and a whole bunch of router bits took top honors for "Most Crap You Have To Keep Track Of - And Find A Place To Put It When Not In Use". Now, thanks to your question "The Lathe" - with ALL the stuff that goes with it is clearly the WINNER!

And having done the mental addition - the little $350 JET VS mini lathe - has cost me far more than the full Festool DOMINO package - that ran a mere Grand.

Just confirms what I've been told by several "turning artists" - it's the tool makers and manufacturers and supplies places that are making the money in the World Of Turning. The artist generate the demand - and reap the least reward - as it seems to always be.

Re: How Many Turning Tools Do You Have?....

#33

Re: How Many Turning Tools Do You Have?....

Gordon Seto

>On a second thought.

If I am not a hobbyist, I may not have one tenth the tools that I have. If I make my living from Woodturning and treat it like a business should. I may have to give some serious thought about the budget and justify the spending. I was buying on what I want, not on what I need.

Re: How Many Turning Tools Do You Have?....

#34

Mike Stafford

And a partridge in a pear tree....

Mike Stafford

>John, that list sounded like you listed everything else....LOL