Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

How Many Turning Tools Do You Have?....

Posts

How Many Turning Tools Do You Have?....

#1

How Many Turning Tools Do You Have?....

Wally Dickerman in Arizona

>And do you use them all? I was looking for a seldom used tool this morning and it occurred to me that I have a LOT of tools, so I counted them. 45 tools!! And I sold several unused tools at our last club meeting. There are perhaps 10 or so that are the workhorse tools. Bowl gouges, a detail gouge, parting tools, certain scrapers, and of course my hollowing tools. The rest are special tools such as my beading tool, a little scraper that I like for refining a curve at the rim or foot, a negative rake scraper, several side ground square nosed tools that I use a lot for certain uses.

All of my tools get used on occasion, but I could get rid of quite a few and really wouldn't miss them.

Except for finials I seldom use spindle turning tools any more.

My count doesn't include piercing, carving and pyrography equipment, but of course they are tools that are used on turnings and should be included.

A few of my tools hark back to the pre-bowl gouge days when I had to make, or redesign tools for bowl turning because none were available on the market.

Does all of this make me a turning tool junkie?

If I lost all of them for whatever reason, I wonder how many I would replace.

Wally

Re: How Many Turning Tools Do You Have?....

#2

Re: How Many Turning Tools Do You Have?....

Wally Dickerman in Arizona

>But then I've been collecting turning tools since the pole lathe was invented.

Wally

Re: How Many Turning Tools Do You Have?....

#3

JL

Re: How Many Turning Tools Do You Have?....

JL

>Roughing gouges - 2 (different sizes)

Spindle gouges - 2 (different sizes)

Bowl gouges - 2 (different sizes)

Parting tools - 3

Bedan - 1

Skews - 2 (different sizes)

Skewchi "gouge" - 1

Specialty tools - 3

Scrapers of one sort or the other - 4

But those are just the "handled" turning tools. Now if you want to count chucks, calipers, etc.....

If you want my nomination for the "King" of turning tools collectors, I would have to say it would be Nick Cook. The man has many drawers that are full of tools.

As far as other tools....

Re: How Many Turning Tools Do You Have?....

#4

Re: How Many Turning Tools Do You Have?....

Greg Haugen

>How many tools? 27

Daily used "gotta have tools"? My skews, spindle gouges, and parting tools-all total 7 tools.

I wouldn't call the rest "seldom used" tools but more "job-specific" tools. For instance I have a group of four tools that are "dedicated" tools for Christmas Ornaments or I have a set of three tools for boxes. There are a few tools that "collect dust" but not many-that's what tool swaps and tool sales are for though, right??

Greg H.

Re: How Many Turning Tools Do You Have?....

#5

Re:I'm afraid to count!

Jamie Donaldson

>

Re: How Many Turning Tools Do You Have?....

#6

Re: How Many Turning Tools Do You Have?....

Steven Kubien

>3 full-time bowl gouges

1 roughing gouge (it's actually a P&N bowl gouge but used for roughing spindles)

1 spindle gouge

2 skews (1/2" round and 1-1/4" P&N)

2 parting tools (diamond and thin-kerf)

1 hollowing rig (Jamieson)

2 scrapers

1 beading tool

Chucks, calipers, dividers, drillchuck etc etc. I guess I'm a novice compared to most.

Cheers,

Steve Kubien

Re: How Many Turning Tools Do You Have?....

#7

Re: How Many Turning Tools Do You Have?....

keith zimmerman, Normal IL

>By my count, I have 30. The counts are 3 bowl gouges, 4 spindle gouges, 1 roughing gouge, 4 skews, 9 hollowing tools, and 2 parting tools.

Is that too many?

keithz

Re: How Many Turning Tools Do You Have?....

#8

Dick Hines

Re: How Many Turning Tools Do You Have?....

Dick Hines

>I have way more than I use. Some belongd to my father and some I bought when I started turning. A lot of those looked like a good thing but did not pan out.

I regulary use one of my 4 bowl gouges, a detail gouge, one of 3 home made parting tools and my hollowing rigs.

Who ever dieswith most tools wins, so buy---buy.

Re: How Many Turning Tools Do You Have?....

#9

Re: How Many Turning Tools Do You Have?....

Doug Thompson near Cleveland

>I have a thousand tools ;)

But like to use just 2

3/8V bowl gouge

1/2V bowl gouge

Back to work... hands and brain numb from grinding all day.

Re: How Many Turning Tools Do You Have?....

#10

fun question.

john lucas

>At last count I had 75. There probably aren't more than a dozen that I don't use on a regular basis. Almost all projects start with the same 6 or so. Sorby 3/4" rough out gouge, Thompson 3/8" spindle gouge, Thompson 1" skew, Thompson 1/2"or an old Sorby 1/2"bowl gouge, Antique 1/4" parting tool, 1/2" flat nose scraper that I use as a shear scraper.

All the rest are used for special applications. I have a lot of various sizes of hollowing tools and of course I have my miniature tools and my macro miniature tools.

Re: How Many Turning Tools Do You Have?....

#11

If I lost all my tools I would ...

Ed Moore in SW Virginia

>start with Doug Thompson to replace the ones I need. And the tool I use the most is my Thompson 3/8" spindle gouge. And next are the 1/4" round skews that I make and sell, like the ones Bob Rosand popularized. The 1" Thompson skew is great too.

For bowls, the Thompson 1/2" V, 5/8" V, and 3/4"V, along with a couple of Glaser gouges are my mainstays.

Ed

Re: How Many Turning Tools Do You Have?....

#12

I Need To Sell My Unused Tools

Jim Shaver - Oakville, Ont

>Hi Wally,

I seldom turn anything but furniture parts and pens these days, I probably should sell off the excess tools I have, I only really use about 10% of what I have on a regular basis, maybe actually use about 30-35% of my turning tools in total.

Take care,

Jim

Re: How Many Turning Tools Do You Have?....

#13

Re: How Many Turning Tools Do You Have?....

John Kyler

>If I listed them they could be used against me by my wife...

She would want more shoes...

But, most of the turning I do is either bone turning or spindle/architecture. But I hope to get back to the artsy side soon with my new job.

John

Re: How Many Turning Tools Do You Have?....

#14

Mike Stafford

Re: How Many Turning Tools Do You Have?....

Mike Stafford

>It is too hot to go to the shop and take an inventory..

In the turning of a box I might use the following: a roughing gouge (I have two different sizes); up to 5 different parting tools, a 3/8" bedan, 2 or 3 different detail gouges, a couple of spindle gouges, as many as 5 different shapes of square scrapers, a up to two round nosed scrapers, an asymmetric round nosed scraper, a negative rake scraper, two or more Hunter tools, a three point tool, a vortex tool, up to two skew chisels, and a chatter tool. That totals 28 different tools and that doesn't include the 1/4" bowl gouge I might use if I take a notion. I have a Berger tool I use occasionally just for practice.

I also have a hook nosed scraper that is gathering dust since I acquired my Hunter swan necks. I also have a variety of spindle gouges, as many as 5 just sitting in the wings when I need them.

I have 5 different bowl gouges from 1/4" to 5/8". The 1/4" is not ground the same as the one I use in turning boxes. I have several large scrapers in different shapes (I think 5), a Sorby multi-tool, a Sorby Hollowmaster, and a dovetail scraper.

Now everyone knows that you don't need all those different tools to turn a bowl and you certainly don't need them all to turn a box. But it is so much fun for me to use as many different tools as I can just because I like to....

Oh, and that does not include my stack of Sears Craftsman 1/8" diamond parting tools and 1/2" skew chisels that I bought when they closed them out. Nor does that include my collection of Shopsmith chisels in every shape.

The answer to the question is too many.

Re: How Many Turning Tools Do You Have?....

#15

Steven Antonucci

Just counted 50...

steve antonucci

>Mostly for hollowing, mostly home made.

I have enough steel in the racks to add another 20+ when I need something.

Some of my tools are multipurpose, and have been created so that I don't need to make two tools, or I suppose I'd have even more...

Steven

Re: How Many Turning Tools Do You Have?....

#16

You Take The Prize.....

Wally Dickerman in Arizona

>as a tool junkie and for using more tools to turn a box than the rest of us put together.

Have you ever watched Raffan or Stott turn a box using only a spindle gouge and a parting tool?....:>)))

Wally

Re: How Many Turning Tools Do You Have?....

#17

I have just a few... 

Peter Teubel

>


img

Re: How Many Turning Tools Do You Have?....

#18

Re: How Many Turning Tools Do You Have?....

robo hippy

>I don't think I have enough because I am still buying more. For bowls, I have 4 Thompson gouges, 1 Ellsworth, 1 Packard, 2 Oneway, 2 Glaser, and a couple of Craft Supplies generic, 4 big scrapers (including 1 Thompson), 2 small scrapers (again, 1 Thompson), a Big Ugly tool (local favorite), dove tail scraper, 1 negative rake scraper, 4 chucks, several sets of extra jaws, 4 curved tool rests, 5 straight tool rests, 3 chain saws (one electric) and assorted tools files and gas cans to go with them, a small bandsaw, a big bandsaw (Laguna), drill press, 6 or so face plates, many calipers and compass', wire drying shelves, 2 vats of dish soap, Mahoney's oil and wax, 2 McNaughton coring systems and tool rests, and extra blades, Oneway coring system, Woodcut coring system, sanding hood, 5 angle drills, multiple mandrils and pads, sanding supplies, spindle tools (3 skews, 1 a Thompson, 4 spindle gouges, a bunch of box tools (parting tools, scrapers), Eliminator set of carbide disc cutters and shafts (3), Monster hollowing system, McNaughton hollowing blades, home made caputred system, a few Sorby hollowing tools and other mini hollowing tools, 3 grinders, diamond hones, drills, multiple face masks and face shields, hearing protection, a box full of allen wrenches, dental picks, several axes wedges and splitting mauls, several sledge hammers, 2 hand trucks (don't leave home with out them if I am going after wood), tape measures and rulers, big scoop shovel, 55 gallon bags for hauling off the shavings, multiple books, a few DVDs, bunch of woodturning mags (AAW, Woodturning Design, More Woodturning), and the wood pile that now almost reaches the street, and multiple tarps to cover it with. I am sure that I have missed a bunch. Well, there is the shop to put it all in.....

I do not have a tool buying problem. I do not have a wood collecting problem.

robo hippy

Re: How Many Turning Tools Do You Have?....

#19

Re: How Many Turning Tools Do You Have?....

Lan Brady

>I always have one less than what I need!

Lan

Re: How Many Turning Tools Do You Have?....

#20

Mike Stafford

Re: You Take The Prize.....

Mike Stafford

>I know, Wally, it is obscene. I have seen the Richard Raffan video. I know it is overkill but I just like doing it different ways. I can turn a box with just a spindle gouge, a square scraper and a parting tool. I just like using all the different tools. Heck somebody has to keep the tool manufacturers in business....

Re: How Many Turning Tools Do You Have?....

#21

Keith Tompkins

Re: How Many Turning Tools Do You Have?....

Keith Tompkins

>HI Wally, I have three complete sets of spindle turning tools, one is reserved for student use. I have three bowl gouges, several home-built specialty tools, such as end-grain hollowers and captive ring tools, and miniature set of finial tools of my own design. One captive rig with laser, one Sorby bowl scraper and hollowing set I bought at auction. Also a handful of miscellaneous gouges and skews.

Re: How Many Turning Tools Do You Have?....

#22

Mike Stafford

P.S. I am ashamed....... NOT!!! LOL

Mike Stafford

>

Re: How Many Turning Tools Do You Have?....

#23

Re: How Many Turning Tools Do You Have?.... *LINK*

Gordon Seto

>I plead the fifth on the number of tools I own.

I was asked the reason for owning so many tools in this thread:

http://www.woodcentral.com/cgi-bin/turning3.pl?frames;read=185334#185334

I don't want the discussion on the tool design be side tracked and this is a more interesting thread to answer.

It was the lottery effect.

No, I didn't win any. When we buy a lottery ticket, we have the dream to be rich. So is buying another tool. After I placed an order and before I tried it out, I thought I am going to get the missing link that make me the next Richard Raffan (or insert any famous turner's name here).

It was the EBay effect.

No, I didn't buy my tools off EBay. Our Club meets at Rockler, on meeting day we get 15 to 25% discounts. When the auction price was higher than what I could get at a legitimate seller was a bargain. I was buying a $80 tool at store which was worth $90 on Ebay. I was not spending $80; I was saving $10.


Bowl gouge flute shape

Re: How Many Turning Tools Do You Have?....

#24

Bill Blasic

Re: How Many Turning Tools Do You Have?....

Bill Blasic

>I know that I have over 75 tools (Maybe I should quit hanging with Gordon)but since the Thompson tools have arrived they have become my goto tools and I really like the 5/8 V Gouge. Just gave away a 1/2 Oneway double ended tool to a friend as I got it the same time as the Thompson tools and I just use the T tools. Our club picnic is coming up and a few of these tools that no longer see the light of day will end up on the raffle table although a lot of guys in the club purchased the T tools when Doug did his demo here last month.

Re: How Many Turning Tools Do You Have?....

#25

Re: How Many Turning Tools Do You Have?....

Gordon Seto

>Bill, Do you feel guilty of owning too many tools? Why? We are just doing our part to keep the economy alive. That is what the stimulus check for. Especially we are buying the Thompson Tools, the money stays here. The problem is with Doug. He buys more steel and grinding wheels, and back to his tool making factory. He doesn't hire any body or go out to spend.

Thanks for inviting my wife and me to your workshop. Since that day, she feels sorry for me for having "inadequate" tools. Now there is no check and balance; I have to resist the impulse on my own. It takes too much time to find the tool that I last used.