Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

How long does it take to dry chunks?

Posts

Re: How long does it take to dry chunks?

#26

That Makes Sense

Stuart Johnson

>If I understand what you are saying it sounds like the wood is not only drying but several seasons of drying and then gaining moisture through humidity tends to make to more stable. If that is what you mean a piece that is at say 10% after a year might be less stable than a like piece at 10% that has gone through six additional years of expanding and contracting.

Even if I'm not following you entirely the whole thread has been very interesting.

Re: How long does it take to dry chunks?

#27

Re: That Makes Sense

Barbara Gill, Remlik VA

>Pretty much that is correct, of course down here in VA the average air dried wood would be between 12-14%. I used to dry wood using a solar kiln. One advantage of this type of drying is that each night when the air cools and the fans stop the moisture increases in the kiln, especially early in the cycle. This serves as a stress reliever; the moisture has a chance to re-equalize throughout the wood.

During those ideal seven years that the wood was kept, there would probably be a variety of conditions including some severe. The wood would expand and contract enough that not only would it have a chance to deform in whatever shape it wanted to take but also there would be stress relief.

Re: How long does it take to dry chunks?

#28

Steven Antonucci

And yet we tell folks to rough turn to 10%?

steve antonucci

>I think we're splitting hairs here, folks. Last time I checked my yard, all of the ebony and rosewood was still growing 10,000 miles away. I'm not suggesting that every wood species in the history of mankind has the same rule, or that the rule doesn't have exceptions, just that my starting recipe would be "an inch per year".

If I trip across an ebony growing in Arizona on a 98% relative humidity day, I'll adjust the guidelines :-)

Steven

Re: How long does it take to dry chunks?

#29

No Ebony...Just Ironwood...

Wally Dickerman in Arizona

>But we do have 98% humidity days here in the desert. During our monsoon season in July and August we sometimes have a thunderstorn/cloudburst day when it might rain 2 inches in a half hour. Ummm, along with 100 deg. temps.

Wally

Re: How long does it take to dry chunks?

#30

Couple of questions

Ron in Drums PA

>1) Do you turn to 10% when you do hollow forms? (BTW - When I core 16" bowls I rough turn to around 1" thick)

2) How many times have we read on a forum where a new turner buys a block of waxed wood, turns off the wax, and wonders why it cracks.

3) How many billets of ebony do you want to buy? I'll be happy to sell you as much as you want and ship it too.

Re: How long does it take to dry chunks?

#31

Steven Antonucci

Some answers: (tongue in cheek)

steve antonucci

>1) Do you turn to 10% when you do hollow forms? (BTW - When I core 16" bowls I rough turn to around 1" thick)

No- I turn to final thickness (usually 3/16" or less") The forms are usually dry by the time I am done cutting. If I don't finish them in one session, they crack because of the differential in tension between 1/8" and 1/2"...

2) How many times have we read on a forum where a new turner buys a block of waxed wood, turns off the wax, and wonders why it cracks.

Anyone that buys wood deserves it to crack :-) Wood is free if you have a chainsaw, and trading makes it cheap. I feel no pity on those folks that spend more money on wood than they do on their lathes :-)

3) How many billets of ebony do you want to buy? I'll be happy to sell you as much as you want and ship it too.

If I wanted a billet of ebony, I'd already have driven out to Drums, Ron. What the heck would I do with it? I already have more wood than I'll get to this year. (Also, see above... cost more than my lathe :-)

Re: How long does it take to dry chunks?

#32

Steven Antonucci

I've been to Phoenix in August

steve antonucci

>I think it's some kind of sick joke on mankind. 118 degrees air temperature and they made us walk across the tarmac when we landed. I'll bet the ground was 150 degrees, and they just wanted to see how many of us would drop before we got to the terminal.

And you want to add humidity to that? That's funny...!

Steve

Re: How long does it take to dry chunks?

#33

Re: I've been to Phoenix in August

Wally Dickerman in Arizona

>It doesn't get quite that hot where I live. Higher elevation. On active monsoon days it seldom gets above 100. Okay, that's hot but that's why we have AC.

Wally

Re: How long does it take to dry chunks?

#34

Peter Charles Fagg (UK)

Interesting discussion

Peter Charles Fagg (UK)

>Thanks to everyone for the input, I have certainly learnt considerably more about drying of timber than I ever thought possible!

It just goes to show that old rules of thumb do not apply in all circumstances.

Thanks Barbara for your email, much appreciated.

Peter.

Re: How long does it take to dry chunks?

#35

Re: I've been to Phoenix in August

Stuart Johnson

>I moved from Denver to Tucson in Feb. and thought I was in hog heaven for the rest of the winter. That summer I cooked but for the next six or seven years winters were cold and summer was great. The days were hot but once the sun went down it cooled off and the temperature was just right to get a couple kegs, drive out in the desert with 40 to 60 others and just party.