Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Trucking Companies (OT)

Posts

Trucking Companies (OT)

#1

Trucking Companies (OT)

Mike Cunningham

>Anyone know of reasonably priced cross country freight carriers. Say Philly to Oregon.

Thanks,

Mike

Re: Trucking Companies (OT)

#2

Re: Trucking Companies (OT)

Mark Mandell - Gone Round In Jersey

>What and how much are you shipping? Full (40' 35,000lb.) load, high dock to high dock, LTL stack, 2 skids, Great Aunt Bessie's hope chest?

Price of diesel, ain't nothin' moving cheap.

mm

Re: Trucking Companies (OT)

#3

Re: Trucking Companies (OT)

Mike Cunningham

>A 600 lb lathe. So who do I contact?

Re: Trucking Companies (OT)

#4

JL

Re: Trucking Companies (OT)

JL

>There are a few variables.

The dimensions of your crated lathe and weight. Can you deliver it to the terminal (less expensive) or do you want it picked up?

If you want it picked up, do you have a loading dock or will you require a lift gate?

Are you shipping to a terminal where it can be picked up by the receiver? If it has to be delivered, do they have a loading dock or will they require a lift gate delivery (not cheap!).

Many trucking companies (Estes, Yellow Freight for example) offer LTL (less than a load) rates.

You just have to pick a company that has terminals in the shipping area and receiving area for LTL service. I'd try Yellow Freight, though there are others that are equally as good.

My $0.02.

Re: Trucking Companies (OT)

#5

Dick Hines

Re: Trucking Companies (OT)

Dick Hines

>I got a shipemnt of big leaf maple a while back. It came from Oregen to Va. total cost was $600 but that was before pump shock.

Re: Trucking Companies (OT)

#6

Re: Trucking Companies (OT)

Mark Mandell - Gone Round In Jersey

>I'd call ABS or Roadway. I don't think they'll pack it for you, so you'll have to palletize it and provide for protection. Call them and see. You may also find a "freight forwarder" in your area. This is a guy who buys truck space and then works to fill the truck with various smaller items of one or two skid quantities. FedEx has a heavyweight ground division, but I have no idea of their rates.

Your cheapest way to do this is pier-to-pier, meaning picking an outfit that has a terminal near you on both ends where you can drop off and pick up. They will have a lift to load or unload your pallet on your truck or trailer. Once you start with residential delivery and lift gate service, the charges jump.

Re: Trucking Companies (OT)

#7

Re: Trucking Companies (OT)

david

>My VL300(800#)was shipped by Craft Supplies from Provo to Honolulu. The lathe was strapped to a wooden pallet and had one layer of corrugated box material over the top. Delivery was with a liftgate truck and a single driver with a pallet lift. Crating over the pallet was minimal to non-existant--a few pieces of lumber strategically placed here and there. I was quite surprised at how little crating was involved. Except for one area where some paint was rubbed nearly bare, everything arrived in good shape. Craft Supplies does this all the time, so they probably had a shipping company lined up for this service. I would echo Mark's advice and check into a freight forwarding company...and ask many questions.

Re: Trucking Companies (OT)

#8

Re: Trucking Companies (OT)

John K Jordan

>>...FedEx has a heavyweight ground division, but I have no idea of their rates.

My sawmill came FedEx a few years ago and the shipping cost was not unreasonable.

If you don't have a dock you might have to pay extra for a truck with a tailgate lift. Or do like I did last time I had a heavy shipment - backed my old flatbed 1-ton truck up to the semi (the beds were the same height) and loaded it with a floor jack.

JKJ

Re: Trucking Companies (OT)

#9

Thanks all!

Mike Cunningham

>