Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

OT: Need a logo made

Posts

OT: Need a logo made

#1

OT: Need a logo made

John Jordan

>I need someone to make me a logo to use for my turning tool business and a new website. I'm a pretty decent woodturner, but need some help with ideas/design/implementation of this. What I do know is that it has to include "John Jordan Woodturning", and be simple and clear-sort of like me and my tools.LOL. No strange type or pictures, though I am not opposed to some sort of simple graphic being part of it.

We have a new website about ready, but need this to finish up. You can check the old website if it might be helpful.

Anyone good at this? I would gladly hook someone up with a nice little piece, or some tools. Email me please.

Thanks!

Re: OT: Need a logo made

#2

Re: OT: Need a logo made

John Jordan

>I'll add that WoodCentral's logo is simple, as is Doug Thompson's. Maybe that's helpful.

John

Re: OT: Need a logo made

#3

Re: OT: Need a logo made

Doug Thompson near Cleveland

>Let's see what everyone comes up with...

This should be fun!

Re: OT: Need a logo made

#4

Re: OT: Need a logo made *LINK*

Ed Davidson (Colorado Springs)

>Try this...free trial:


Logo Design Software

Re: OT: Need a logo made

#5

Re: OT: Need a logo made

James McClure

>How about using a stylized version of the bed casting on the Stubby when it had your name on it? And you could add the word Woodturning to it.

So, the logo would have the horizontal lines and cut out holes to represent the Stubby bed casting. The font would also match what was used in the casting.

Just an idea...

Re: OT: Need a logo made

#6

OK ... just for fun ;-)

Ed in Leaside

>Illustrator was open, without loading additional fonts, simple like the WC logo, and on the background color from his website. The type could be smaller to place a small graphic in the centre.


img

Re: OT: Need a logo made

#7

Re: OT: Need a logo made

Ed in Leaside

>I'm not very good at ideas & design, but implementation from a concept is not so difficult. I must say though, that normally the choices for banner color, header typeface, and body copy typeface are somewhat dependant on your logo. It should have come first.

Re: OT: Need a logo made

#8

Re: OT: Need a logo made

Raymond Overman in SC

>I'll give it a go. Other file formats or sizes as requested.

Yes, that's a representation of the piece in the middle on your site.


img

Re: OT: Need a logo made

#9

Re: OT: Need a logo made

Raymond Overman in SC

>With white background.


img

Re: OT: Need a logo made

#10

Steven Antonucci

That would be a winner if it were mine!

steve antonucci

>Love the design, but I don't know if you could make a burning logo for signing the work. For printed/web marketing, I think it's awesome!

Steven

Re: OT: Need a logo made

#11

Here is a try.... 

Jerry Hall

>


img

Re: OT: Need a logo made

#12

Re: That would be a winner if it were mine!

John Jordan

>Wow, you guys are something-very generous with your time. I didn't really mean for this to be a contest of sorts, please don't invest more time than you can spare-I can't give tools to everyone, though i would like to. LOL. I appreciate everyone's input very much. I've gotten several by email already.

Ed, that looks good, but I don't want it to look like WC's. The people here instantly associate a yellow oval with WC, it's distinctive-you see it daily.

Ray, I like that one. I'm not sure the texture will read well enough, though- maybe a hard, more geometric spiral?

This is really hard for me. Sean just wrote to me that I would know when it's the right one-that's what I'm hoping.

Again, this will be used for the new website, and advertising, printed type stuff.

Thanks again.

John

Re: OT: Need a logo made

#13

Re: OT: Need a logo made

Carole Valentine

>Another whack at it - very simple, color could be anything and could be sized for any product. Logos are so personal that you will probably end up designing your own, John! LOL


img

Re: OT: Need a logo made

#14

hard, more geometric spiral

Ed in Leaside

>Spirals are easy. BTW, it's not much time, and I'm not looking for a tool. Just funnin' around. I think the first one took max 15-20 minutes. Think of it more as a sketch to start the ball rolling and generate some comments like "yuck, that type sucks" or "hmm ... not too sure about that green" or "that spiral needs a few more segments, or a tighter spiral, 'cause it looks like ..."


img

Re: OT: Need a logo made

#15

A final attempt!

Jerry Hall

>Need to get back to the shop!


img

Re: OT: Need a logo made

#16

Re: hard, more geometric spiral

Raymond Overman in SC

>Expanding on my spiral concept... and adding a stylized double J as well.


img

Re: OT: Need a logo made

#17

This one gets my vote!

Jennifer@Indy.USA

>

Re: OT: Need a logo made

#18

Ditto Jennifer

john lucas

>

Re: OT: Need a logo made

#19

this is a beauty, but...

GaryG in MD

>...I would modify it just slightly --

I would bring up the line of the outside spiral higher to about the top of the "JOHN" and cap it with another horizontal, just like the other one. That way, the spirals would be a "JJ" too. Perfection! ...Gary

Re: OT: Need a logo made

#20

This one is cool....

Eddie Pacheco: San Jose, Ca.

>This looks good to me, Jerry! Any way that the J could be a tool rest or tool? Or leaning into the vessel like it's cutting away material?

Re: OT: Need a logo made

#21

Re: This one is cool....

jerhall

>Eddie, Those are interesting ideas to explore if this goes anywhere. Thanks. I was trying to keep it simple as John wanted, and evoke something of John's signature work thru the form. The vessel is made up of two intersecting stylized "J's" and the big Celtic "J" alluded to a carving on the the vessel. A thought might be to play with the color of the sides of the vessel, and make the right side darker and wider to add some dimension. Anyway, time to go turn! Jerry

Re: OT: Need a logo made

#22

Yes, but ...

Ed in Leaside

>John was asking for "logo to use for my turning tool business and a new website" and "simple and clear-sort of like me and my tools". I take it that the emphasis is meant to be tools, not turnings, in which case the logo should be less an artisan's logo and more a toolmaker's logo. Yes I know they're both artisans, but one's market is to the public and the other's is other artisans. :)

My shop-mate's wife is a professional potter and makes a yearly pilgrimage to, I think, BAFA in Boston(?) and returns with a bag of literature, postcards, and business cards. Both this and Raymond's last (business card proportioned, BTW) remind me of the contents of that bag. The question is, is this the image John wants to project?

Re: OT: Need a logo made

#23

Maybe a "coat of arms?"

jerhall

>Ed, Good points. Emphasize his art? tools? lathes? The form of his hollowing tools are beautiful indeed. Maybe someone can take one the curved tools and use those shapes to make a logo with stylized vessel sides or a coat of arms. They would make an awesome weapons display! I will always think of John for his forms, vessels and surfaces. And the tools, beautiful objects that they are, I see as enablers for his art, which he is good enough to share with us all.

His challenge is to create an image that evokes his work, philosophy of craft, and that introduces the theme of his new, unveiled, web site, and as he says feels right to him. Not easy. Jerry

Re: OT: Need a logo made

#24

My vote here!

Carole Valentine

>Good work, Raymond!

Re: OT: Need a logo made

#25

Re: Maybe a "coat of arms?"

John Jordan

>You all are putting a lot of thought into this, thanks! The use of the logo is really for the tool business, but I do show some of my work on the website, and obviously it's all related. If it was just my work, I probably wouldn't bother, but need something simple to use in lieu of just having my name across the top of webpages etc. Some siple, stylized reference to my work, such as the spiral is OK.

Thanks for all your help.

John