Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Turning blanks

Posts

Turning blanks

#1

Turning blanks

Michael Brady

>I'm a bit of a newb when it comes to buying exotic wood blanks for turning. I have purchased some blanks that are covered completely with a heavy layer of wax. Upon resawing the blanks for use I have discovered several disconcerting things:

1. checks in the wood that run all the way through making it almost useless for turning

2. the wood is different in appearance after resawing than it appeared under the wax. Example: Indonesian rosewood looked great in the store, but actually was similar to black walnut after sawing and had rather ugly large pores. Some nice walnut would have been much better.

These were purchased at the usual wood woorking store such as Woodcraft and Rockler. Are there some sources for nice wood that won't deceive you with the wax treatment?

Re: Turning blanks

#2

Re: Turning blanks

Wally Dickerman in Arizona

>Try gilmerwood.com. They have lots of photos of some very choice wood. They shellac the wood to bring out the figure. The end grain will be waxed for protection. I've dealt with Gilmer for over 20 years.

Buying wood on the web is always taking a chance, but buying from big dealers like Gilmer is a better choice than from very small dealers in wood like Woodcraft and Rockler IMO.

Wally

Re: Turning blanks

#3

Steven Antonucci

Save your money.

steve antonucci

>As much as we all love "exotics", why not seek out your local exotics?

Almost everywhere you look, you'll find something worth turning. If you find it in quantity, the USPS makes it easy to send to some far away land on the other side of the country to get their "exotics". I used to buy wood and pay to ship it. Now I just pay to ship it...

Steven

Re: Turning blanks

#4

Re: Turning blanks

Barbara Gill, Remlik VA

>One day I was in a local woodworking store looking at some of the blanks out of curiosity. Just to satisfy myself I proceeded to figure out the bd.ft. price of some. The relatively unfigured dry maple was around $30/bd.ft.

Re: Turning blanks

#5

Re: Turning blanks

Cyril Griesbach

>Amen, Barbra. Figure it out on a purchased pen blank some time. Yikes!!

Re: Turning blanks

#6

Re: Turning blanks

Bruce McElhaney, Spring Lake, Michigan

>Why not try Dan Bailey at, Roughoutbowls.com. He sells a variety of domestic wood, bowl blanks in all sizes, and at reasonable prices. I've purchase quite a few rough-outs from him and have always been satisified.

Re: Turning blanks

#7

Re: Turning blanks

Justin Fields

>I went through the same process. I ended up making a spreadsheet to calculate it. A screen capture of a sample is attached. You just plug in the thickness and it computes costs for sizes up to 12 inches square. Or you can change a size and it will recompute for the custom value. If anyone wants the spreadsheet itself, let me know. I also have one for spindle blanks.

Justin (Computer Dork) Fields

PS Fuzzy screen cap, due to squeeking in under the WC 80k limit.


img

Re: Turning blanks

#8

Re: Turning blanks

Wally Dickerman in Arizona

>There is a big difference in the sales value of highly figured wood and the cost of plain hardwood lumber or bowl blanks. Found wood seldom has the combination of figure and color that makes some of the wood available at reputable wood dealers so desirable. If you want the best, expect to pay for it.

Wally

Re: Turning blanks

#9

I just calculate the cost in my head...

Brian Hahn in SW Wisconsin

>but then I was born and educated before electronic calculators and personal computers :))

Re: Turning blanks

#10

Re: I just calculate the cost in my head...

Justin Fields

>I was just curious. Also, the math was annoying on pen blanks with fractions. At the time, I was contemplating a project that would have used a lot of pen blanks glued together, then turned. But once I saw how much the total cost would have been, compared even to buying exotic lumber as boards, I revised the plan.

I'm not saying I wouldn't spend a premium on good figured wood or something, but I want to get an apples-to-apples cost comparison on the more regular wood, to determine the convenience cost of having things precut.

Justin

Re: Turning blanks

#11

Re: Turning blanks

Gary Evans Tallassee, TN

>That's one reason I don't like AnchorSeal for the ends of the blanks that I take to symposiums. It muddles much of the figure that can be seen on the ends. I have tried shellac, which really accentuates the grain, but even blond shellac can darken light wood excessively, in my opinion.

I don't know what the return policy is where you bought your wood, but if I sold you a piece that was too checked to use, I'd give you another piece of wood.

Gary