Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Milo Vessel

Posts

Milo Vessel

#1

Milo Vessel

mfoster

>After posting a picture of some butternut bowls I turned for xmas and whining about how difficult I found the wood to turn, I got an email from David Chung who proposed a wood exchange. He sent me a block of Milo from Hawaii where he lives. I had several other projects going this winter, but finally got around to turning it. The block he sent me was a largish branch with the pith included and was sealed well. I found the wood was SWEET to turn. It has a pleasant odor which reminds me of some other wood I've turned, but can't put my finger on, maybe Myrtle. I decided to carve the piece and found that it was just as nice to carve as it was to turn.

All comments/critiques welcome.

Thanks for the experience and the wood David.

Mike Foster


img

Re: Milo Vessel

#2

Re: Milo Vessel

david

>Mike:

An outstanding piece! One of the nicest Milo pieces I have seen in quite a while. You did great justice to this wonderful wood. In exchange, I experienced the mushy fiber that Butternut presents in side grain mode. Having a little trouble finishing the piece I made after I put it aside for a while. Will post a photo soon.

David

Re: Milo Vessel

#3

Steven Antonucci

Like the vessel

steve antonucci

>David is a great wood trading partner, since he lives in a land of exotics! I was turning a piece of norfolk island pine that we traded (he got walnut in return), but the tenon started to let loose as I thinned the bottom of the vessel (so I'm a bit thick on the bottom).

So, I'm guessing there were no routers involved in the making of this piece?

Steven

Re: Milo Vessel

#4

Re: Milo Vessel

Randy G

>Great looking vessel, I really like the turned shape and the carving you did. Great work

Re: Milo Vessel

#5

Re: Milo Vessel

mfoster

>Thanks for the comments. Steve, the piece was carved, inside and out to obtain a relatively consistent 1/8" wall thickness. Figuring out how to set up a jig to rout the interior could be quite a challenge.