Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

DeWalt lathe spindle size?

Posts

DeWalt lathe spindle size?

#1

DeWalt lathe spindle size?

Bill Grumbine (Kutztown PA)

>Greetings all

A friend of mine is looking to get a chuck and a faceplate for his old DeWalt lathe, but is not sure of the spindle size. I looked at it, and it does not look like anything I own - i.e. 1" x 8 TPI or 1 1/4" x 8 TPI. The model number on the end of the machine says 730-1. It looks to be a 1" spindle, and the thread count seems to be 10 TPI.

Does anyone here have any info or know where I could find some for this guy? Searching through Google got me a lot of weird and unrelated hits.

Thanks.

Bill

Re: DeWalt lathe spindle size?

#2

Funny you should ask.

James McClure

>Bill,

A few months ago, a friend of mine gave me an old lathe that he had in the back of his building. He runs a landscaping business. It was mounted to an old school desk. I told him I would take the lathe, but I didn't want the desk so we un-bolted it and I took it home. It had what looks to be a washing machine motor that was attached to the desk. I haven't done anything with it since I brought it home, but I have a plan to make a nice stand for it and maybe get one of the Penn State variable speed drives for it. One day...

Anyway, it is a DeWalt model 730. What are the odds of that? I assumed it was a 1" x 8 tpi like most of the mini-lathes now have. I just walked out to the shop and after getting the stuck spur drive out I tried my 1x8 Nova insert on it. No such luck. I'm no good at measuring threads per inch, but I put a ruler next to it and counted 5 threads in a 1/2 inch span so my guess is that it is 10 threads per inch.

Hope this helps!

Re: DeWalt lathe spindle size?

#3

No DeWalt listed here, but may be useful anyway... *LINK*

david

>This URL address has a link to a .pdf file that Walter Jones compiled with various lathe specs.


Lathe Specifications

Re: DeWalt lathe spindle size?

#4

Re: DeWalt lathe spindle size? *LINK*

Chuck Engstrom

>Once you establish for sure what the thread is, you might find it at www.e-taps.com. Their catalogue shows 1"-10 tpi along with many other usual and not so usual combinations.

Good luck--

Chuck Engstrom


Link to e-taps.com

Re: DeWalt lathe spindle size?

#5

Re: DeWalt lathe spindle size? *LINK*

Gordon Seto

>Bill,

Nova has 1" X 10 TPI insert.

An alternative may be using faceplate rings with a chuck instead of faceplates (I think your friend would like to have a chuck as well.) When he upgrades to a popular size lathe, all he has to do is replacing a single chuck insert instead of having all those obsolete odd size accessories.

Gordon


Spindle inserts

Re: DeWalt lathe spindle size?

#6

some grizzlys are 1x10

robert davis

>

Re: DeWalt lathe spindle size?

#7

Re: DeWalt lathe spindle size?

Don Evans

>Bill:

Hate to be this way, but why don't ya just measure it? All you need is a regular 12" ruler, count the threads for one inch then measure from top of one thread to other side for the diameter? Or use calipers and then lay that on ruler.

Don

Re: DeWalt lathe spindle size?

#8

Re: DeWalt lathe spindle size?

Bill Grumbine (Kutztown PA)

>Thank you for the responses gentlemen. The issue is not where to find accessories though, it is in finding out for sure what the spindle size is.

Don, it did in fact occur to me at the time and I did measure it. There were eight threads in the 7/8" of spindle that was threaded, which is what led me to write, "the thread count seems to be 10 TPI". Using math alone, that gives me a thread count of 9 TPI. I suspect that that is not the case. The thread is not as coarse as my 8 TPI spindle, and James has confirmed that with his response.

I suppose my friend can gamble and experiment, starting with a 10 TPI adapter, but I was hoping to get some more definitive information for him before going that route.

James, on a side note, I am going to be in your neck-o-the-woods in a little while. Have you spoken with Chuck Ward at all?

Bill

Bill

Re: DeWalt lathe spindle size?

#9

Re: DeWalt lathe spindle size?

James McClure

>Bill,

Yes, I've talked to Chuck. We have announced it at our club meeting and I think we will have several of our guys come over to see you.

Unfortunately, I have a class at the Woodcraft store in Mobile on April 12th so I will not be able to make it. I think my dad may drive over though. Hope everything goes well and I'm sorry I have to miss it.

James