Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Moving day

Posts

Moving day

#1

Moving day

Carole Valentine

>Well, all the heavy iron and stuff was moved to the new shop today. No casualties - at least none that I am aware of. That big open space sure did shrink. Now I have to figure out what to do with all the small stuff that was all over the walls and on tons of fixed benches in the old shop.in the old shop


img

Re: Moving day

#2

Pic 2 

Carole Valentine

>


img

Re: Moving day

#3

Re: Moving day

Barry Turner

>What kinda shop is that? Only two lathes? And what's all that other equipment for?

Re: Moving day

#4

Re: Moving day

Carole Valentine

>Um...I think all that other junk is for what they used to call "flatwork". I just uncovered most of it when I started moving piles of junk in the old shop. :)

Re: Moving day

#5

Beautiful!

David Propst

>Carole,

The shop looks wonderful. Congratulations!

Like Barry, I also wondered what those other strange looking machines were. I have some of those too, they make great bowl blank holders.

Best Regards,

David

Re: Moving day

#6

Re: Moving day

tm

>Very niice, well lit workspace.

I think you be happy with the changes.

John

Re: Moving day

#7

Ditto! Very nice!

david

>

Re: Moving day

#8

Outstanding!!

Dave Peebles Lyons, Ohio!

>Hi Carole,

That looks terrific. Now the fun begins, getting everything in it's proper place.

I have been in my new place about ten years, I think with just a little more work, I will have it (Just Right) :)

Best wishes,

Dave

Re: Moving day

#9

Re: Moving day

Clay Foster

>Carole,

Congratulations on your new palatial sanctuary. Creation deserves a special place. You'll enjoy every moment you spend there.

Re: Moving day

#10

Congratulations

Brian Hahn in SW Wisconsin

>That's a great looking shop. Lots of lighting and wall space for storing stuff. I love the wood floor.

I noticed you also have that all-important accessory - a chair to sit in and contemplate.

Re: Moving day

#11

JL

Re: No floor paint?

JL

>Not that I have anything against plywood. It is looking good though.

Re: Moving day

#12

Nothing spared. Beautiful shop.

Norm Smith

>

Re: Moving day

#13

Re: Beautiful!

Carole Valentine

>David! Where have you been? Are you coming to Richmond in June?

Re: Moving day

#14

Proper place??? Ha!

Carole Valentine

>At risk of being banned from WC for posting an obscene picture, here is a shot of my old shop. This was after piling everything that was on a horizontal machine surface and the moveable workbenches on top of already existing piles on the fixed benches on Thursday. The worst part of moving is still ahead I fear...sorting through all that stuff!


img

Re: Moving day

#15

Re: Moving day

Barry Turner

>Yeah, I've got some of that stuff in my shop, too. A friend at work asked me to make her another shelf for her oak entertainment center a couple of weeks ago. No problem! How hard could that be? Piece of cak, I told her. I bought an oak board at Lowes', hurried home and went to the shop. I quickly realized that my tablesaw was hopelessly buried under tons of turning supplies and tools. (Tablesaws make great tables!) It was so bad, I ripped the board to width on my bandsaw, rather than remove all the stuff that was on my tablesaw! I was able to get to my radial arm saw to cut the board to lenght. I only had to move a few dozen bowl blanks. Gad, has it been that long?!?!?

Re: Moving day

#16

And the other corner... 

Carole Valentine

>


img

Re: Moving day

#17

Re: Proper place??? Ha!

Barry Turner

>Now, that's a shop! Your new one needs a lot of work!

(Actually, it's beautiful and I am insanely envious!)

Re: Moving day

#18

Re: No floor paint?

Carole Valentine

>Floor paint? What in the world for? Another bunch of $$ doing something I hate (painting) just so I can watch it get all eaten up from dragging equipment across it, spilling finish or God only knows what on it. Nope I would rather put that money towards a DC. The door frames will be painted, though. :)

Re: Moving day

#19

Re: Moving day

Steve Russell

>Hello Carole,

Congrats, your new shop looks fantastic! I have one of those strange flatwork machines sitting in my studio as well, a Delta Unisaw. It makes a great place to store tools and bowl blanks, especially with the long table extension. :-)

One thing you might consider is protective shields over your fluorescent tubes near the lathes. These are removable/replaceable clear plastic tubes that slip over the light tubes and if anything hits the tube (flying debris), it will contain the broken glass inside of the tube instead of showering it all over you and the floor.

You can get these tubes from home centers, but I'm not sure if they carry them in eight feet long sizes. A regular electrical supply house should have them in this size if homely depot does not carry them. Good luck to you in getting everything setup and squared away. I'm in the process of doing a little of this myself as I'm in the middle of remodeling my studio. I'm still trying to figure out where to put everything... :-o Take care and all the best to you and yours!

Steve Russell

Wednesday Night Turning Chat Moderator

Re: Moving day

#20

Hey, look!

Joanne Adler in Pt. Pleasant, PA

>Flatlander tools! And they actually still have clear surfaces! I'm sure that won't last long. Shop looks fabulous. You go, Girl! Have fun filling it up and getting set up just the way you want.

Re: Moving day

#21

Now you need...

Jorge Castaneda~Downeast Maine

>a vacation after all that work Carole! ;o)

It looks great and look forward to see what you create in there.

Congratulations

Jorge

Great chance to cull mercilessly all that "junk".

Re: Moving day

#22

Re: Moving day

Carol - now in NC Nebraska

>Paint me GREEN! with envy.

Enjoy. No one deserves it more than you.

Next picture? One of you sitting in a rocker on your porch with a cuppa in hand, enjoying the fruits of your labor. You deserve that too.

Re: Moving day

#23

Re: Moving day

John Veerkamp

>I'll jump in too. It's been fun following the shop progress. Don't worry, it'll feel like home in a few weeks when the shavings accumulake enough to hide the raw edges. Saw plenty of material in the old shop pics to get you started.

Enjoy,

John

Re: Moving day

#24

You are reading my mind!

Carole Valentine

>I just put a rocker in the corner with a little table and a magazine rack this morning. The table has my coffee mug heater on it. :) Raven's bed is next to the rocker in "our little corner" near the front window where we can read, ponder, or just watch the world go by. Front porch will have rockers eventually.

Re: Moving day

#25

Re: Proper place??? Ha!

don lewonczyk

>No wonder I can't get anything done, thats how my shop looks like every day. Your new shop in the eyes of any woodworker is exciting and should make you very happy and including me I think everyone is glad you have it. Have fun in there and don't forget some sore of easy chair so you can sit back and enjoy the view and admire you work.

Take care, DonL