Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Larger Roughing Gouge

Posts

Re: Larger Roughing Gouge

#26

ebd

Re: Larger Roughing Gouge *LINK*

ebd

>I use this one from Cutting Edge (with the wings ground back some) for everything from roughing to finish work on bowls. It is the best all around tool I have found. It's heavy and shallow enough that you can use it like a skew. It's easy to control and you can see what you are doing - it's very forgiving.

301-HS42H Forged Gouge 1-1/4" $72.99

It's the forged 1 1/4" at the bottom of the page that the link takes you to. In the picture it's the middle one. It looks like the sides are flat but they are not, they are round.


img

Forged gouges

Re: Larger Roughing Gouge

#27

Using it for "spindle" type work.

Joe Pack

>My specific purpose is to round out a number of triangle shapes that I will glue up in the 12"long x 2 " range. After jointing edges to the proper degrees, I will glue up the three 12"x?"x3/4" boards into a triangle, then round.

I've never used a roughing gouge on bowls, but have read and been told by several folks that this is a no-no. I believe them, and have no desire to find out the hard way that they were right.