Mini metal lathe books?
Ron in Drums PA
>Does anyone know of any books for the basic use of a mini metal lathe?
TIA
Knowledge You Can Build On — Est. 1998
Mini metal lathe books?
Ron in Drums PA
>Does anyone know of any books for the basic use of a mini metal lathe?
TIA
Re: Mini metal lathe books?
Jose Klipstein -Cleveland OH
>For a wealth of information on this subject, go to this website http://www.littlemachineshop.com/Info/links.php and just follow the links. It will keep you busy for hours!
Re: Mini metal lathe books?
Ron in Drums PA
>Thanks Jose, allot of good info there.
Re: Mini metal lathe books?
jwoodwright
>Ron, Here's a Yahoo Group, very active helpful group...
http://groups.yahoo.com/group/7x12minilathe/
Re: Mini metal lathe books?
Roger in MO
>Ron, many years ago South Bend Lathe Works published a small book titled: How to run a lathe" The earlliest copyright is 1914, my copy is copyright 1954. If you can locate a copy it will probably give you more info than you knew you wanted. It was a standard text for high schools and colleges that taught industrial arts.
I have an 8" South Bend, bench model, with gear changes required to change feeds or cut threads. It has a WW II production war board sticker on it. Old but still very useful for a tinkerer.
Good luck
Roger
Found it
Ron in Drums PA
>Bought it, thanks
Re: Mini metal lathe books?
Andy Blackwell
>The Home Machinist's Handbook, author Doug Briney, covers mini-lathe and mill operations using the Sherline lathe and mill for illustration. You may want to check it out if it's still in publication. Publisher - Tab Books, Division of McGraw-Hill