Re: Brittle Glue...
Fog Tanner
>John,
You are correct in your observation, CA doesn't have any flex. From that standpoint it is brittle under certain loading conditions. There have been some formulations over the years that claimed to be flexible, but they are still a hard joint. Typically the wood around the joint will flex and possibly fail. A lot of the strength in the joint also has to do with moisture content in the wood. I have some well aged prime balsa wood that I have had for over 25 years. I went to glue sime of it togther, ran the CA along the seam. When and picked up one of the pieces the other stayed on the bench. It was too dry and I had to use a damp spong to get the glue to set.
A number of years ago, I read a study on glues for wood. The aphalic resin glues were the strongest, followed by epoxy (excluding 5 min)and then CA. Back in the late 70's there were some cyno aphalic instant glues, which were good glues and I used a lot of but I have not seen those in years.



