Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Wood turning tool holders

Posts

Wood turning tool holders

#1

Wood turning tool holders

Douglas M Smith

>It has been a long time since I posted on this site.

I am in the process of setting up a new workshop. I want to build a some kind of upright turning tools holder. I don't want to just lay them down on the workbench anymore as they take up too much space. Although I only use about two or three turning tools for most of my work I still like to have a place to put all that tools I may have to use from time to time so they will be close.

In the past I just kept them in a cabinet but due to a injury to my knee I have a hard time bending over to even see them much less get one. I like to them be close at hand now but out of the way.

I have some ideas but would like to see other ideas before making a tool holder. Thanks

Re: Wood turning tool holders

#2

Re: Wood turning tool holders

Bill Howatt

>I gave up on storage cabinets, rolling racks, cabinets - the tools tended to be left out of the unit, the unit filled with chips or it wasn't easy to select the correct tool.

I made simple holders that I screwed onto the wall behind my lathe down from the headstock end. I realize not everybody has a convenient wall though.

Holding piece has a row of 1-1/8 or 1-1/4" dia holes drilled with a Forstner style bit offset about 1/4" to form a captive hole with an opening.

Bill


img

Re: Wood turning tool holders

#3

Re: Wood turning tool holders

Brian Hahn in SW Wisconsin

>My tool holders are on the walls, etc. around the lathe. I leave the tools I'm actively using on the lathe bed or stand - my handles have hexagonal flats on them so they don't roll away.

This holder is mounted on the back of some storage shelves behind my main lathe.


img

Re: Wood turning tool holders

#4

Another one...

Brian Hahn in SW Wisconsin

>This is on the wall at the end of my mini.

The tool holders were made out of wood I had on hand. The dividers are 1/4" thick.


img

Re: Wood turning tool holders

#5

Should also mention

Bill Howatt

>Even though it is fairly convenient to put the tools back when being used, I have a small plastic waste-basket on the floor partly under the bottom shelf of my lathe that I stand the "in-use" tools in, point down, while working.

Bill

Re: Wood turning tool holders

#6

Dick Hines

Re: Wood turning tool holders

Dick Hines

>I took a piece of ply wood ans screwed PVC pipe to it. The pipe will not hold any dust or chip. 1 1/2" pipe will work on most tools.

Re: Wood turning tool holders

#7

Re: I believe I've posted this before, but..

Jamie Donaldson

>... here's the tool caddie that holds the tools in use beside the lathe.


img

Re: Wood turning tool holders

#8

Re: Another one...

dtewell at central illinois

>Brian, looks like the termites got hold of the handle closest to the camera in this photo!!

Re: Wood turning tool holders

#9

Nasty, Technicolor ones!

Brian Hahn in SW Wisconsin

>I had a lot of fun making that handle because it is so different from my standard handles. Here's a picture I posted last fall.


img

Re: Wood turning tool holders

#10

Re: Wood turning tool holders

Peter Teubel

>Here's a few ideas.

Wall cabinet for all my turning tools:


Folding tool tray for my small lathe:


Tool holder for my big lathe:


Re: Wood turning tool holders

#11

Roger in MO

Re: Wood turning tool holders

Roger in MO

>Page down to January 13,2008 for photos of a tool holder mounted on the end of the lathe and hinged. It also uses short lengths of pvc pipe. This is a prototype for me--eventually I'll dress it up. (rainy day) So far I like it.

Re: Wood turning tool holders

#12

Re: Wood turning tool holders

Bill Hale / The Wood Spinner

>Here is a Pic of my main rack for tools. As you can see it is mobile and easy to clean around. These are the tools I use 95 % of the time. The rest of my tools are on another mobile tool rack set on a mechanic tool chest that gives the drawers I need.

The main rack is made on a furniture moving roller base, $ 19.00 and very stable, Milk crate free, magnet bar $ can not remember but cheap and the balance wood from around the shop.

Good turning and be safe

Bill in CG, AZ.


img

Re: Wood turning tool holders

#13

Re: Wood turning tool holders

Douglas M Smith

>Thanks for the reply and help. I got some good ideas on making a tool holder for my tools now.

Re: Wood turning tool holders

#14

Re: Wood turning tool holders

Larry Bisbee

>I made two woodturning tool holders. One tool storage that hangs on the wall and the other that fits under the lathe. The picture below is of the wall unit.


img

Re: Wood turning tool holders

#15

Re: Wood turning tool holders

Larry Bisbee

>The following picture is of the tool holder under the lathe. The storage unit that the tool holder sits on has four drawers used for storing miscellaneous woodturning tools/supplies.


img

Re: Wood turning tool holders

#16

Re: Should also mention

Carole Valentine

>Me too. There is a layer of dry shavings in the bottom to cushion the tips.

Re: Wood turning tool holders

#17

Re: Wood turning tool holders

Ron McKinley

>You fellows have some really neat ideas about holding tools. Thanks for posting.......Ron

Re: Wood turning tool holders

#18

Re: Wood turning tool holders

Larry Gottlieb

>I don't have a convenient wall next to the lathe.

I use a 5 gallon bucket filled with shavings and put pvc tubes into the shavings. The tools go into the tubes and the points are protected by the shavings.

Larry