Looking for a better curved tool rest
Ron in Drums PA
>The curved tool rests I have for the 3520 seem to vibrate to much.
Who makes a good rest for large diameter work?
TIA!
Knowledge You Can Build On — Est. 1998
Looking for a better curved tool rest
Ron in Drums PA
>The curved tool rests I have for the 3520 seem to vibrate to much.
Who makes a good rest for large diameter work?
TIA!
Re: Looking for a better curved tool rest *LINK*
david
>The Oneway multi-purpose toolrest works pretty well for me. This is the L-shape versus the T-shape. Needed to reach deeper into bowls, and this one does the trick. Like all the Oneway stuff, built like a tank. The finish looks like cast aluminum, but is stainless steel.
Oneway toolrest
Re: Looking for a better curved tool rest
Ron in Drums PA
>Thanks Dave
I was told the oneway tool rests won't work in a 3520.
Do you know if this is true?
Re: Looking for a better curved tool rest
Wally Dickerman in Arizona
>Don't overlook the curved rests made by Delta. It's a good solid rest made for inside or outside. Right handed or left handed and even mini.
Wally
Re: Looking for a better curved tool rest
Steven Kubien
>Ron,
I have heard of lots of people getting things customized by Oneway. Tell them what lathe you've got and I am sure they'll be able to help you.
Steve Kubien
PM3520 Version *LINK*
Jerry Hall
>They stock the longer post, and I got it no problem. Just call in the order and make it clear. I got both the curved "T" style tool rest (which I never use) and the curved multipurpose one. Very happy. Thinking of painting my Mustard Monster mayo color so it will match the tool rests.
http://www.oneway.ca/lathes/toolrests.htm
Re: Looking for a better curved tool rest
Dennis Yoder
>Ron, I've been very happy with mine from Best Woods. Dennis Y
Re: Looking for a better curved tool rest
Mark Strang
>Oneway tool posts worked in my old 3520b. They are great with little ,if any, vibration on bowls up to 20 inches in dia.
I have the 2 piece Woodcraft one
steve antonucci
>And it doesn't vibrate at all from what I've seen. The curved part is probably 1/2 thick x " and screws into the bottom post. It can be changed for a bunch of different lathes and profiles.
Best of all is that it wasn't very expensive, and I can probably make more attachments for it myself.
Steven
Re: Looking for a better curved tool rest
robo hippy
>I have had the curved tool rests from Oneway for a number of years, and like them both (inside and outside). A few years back, they changed the post length to fit their 16 inch lathe, and it was too short for the PM. I got one that was too short from Craft Supplies, and called them. They told me to call Oneway. I did, and sent it back to them, and they sent me one with a longer post. I believe you can now get them through the catelogues, but have to request the longer posts. The inside one does vibrate a bit when out at the end, but it works well.
robo hippy
Thanks
Ron in Drums PA
>I picked up the oneways