Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Chainsaws

Posts

Re: Chainsaws

#26

Re:Electric Chainsaws

Charles B. Watson

>My 16" Makita is great! One piece of equipment I can truly say was worth the purchase price.

Re: Chainsaws

#27

I went thru 3 cheapies...

Peter Teubel

>Again, Stihl rules. Got an MS180. Not cheap (around $350), but well worth it. Steel gears and a slip-clutch on the drive gear so the motor won't burn out if you jam up the chain.

Re: Chainsaws

#28

Re:Electric Chainsaws

Brian Hahn in SW Wisconsin

>I bought a Makita after burning out a Remington. The difference is day and night. The Makita cuts fast and the motor is protected by a clutch (like the Stihl) that slips when you get too aggressive. I got mine through Amazon for about $200 two years ago. Surprisingly, the Makita was made in Germany.

Re: Chainsaws

#29

Re: Chainsaws

Justin Fields

>Thanks for all the input folks.

This morning, I bought a Stihl 290, with a 16" bar and an extra chain. I had already bought the Stihl safety DVD online. It was well worth it.

I'll post more when I actually get some blanks cut.

Justin

Re: Chainsaws

#30

congrats...

GaryG in MD

>on your choice Justin. That's a very good choice. You'll get a lot of great use out of it. Now you have to start reading about maintenance and sharpening. There is a ton of info here in the Archives on both subjects. There are lots of little tricks to make it easy to start, etc. It was a pleasure to meet you last night. ...Gary

Re: Chainsaws

#31

Re: Chainsaws

Barry Turner

>First of all, if you are going to be cutting bowl blanks, I wouldn't characterize your chainsaw usage as "light", but instead, "infrequent" usage. Big difference. This doesn't mean you need a "light" chainsaw. Cutting bowl blanks is a pretty tough job for a chainsaw. It can be done with a "big box" saw, like Poulan, Homelite or McCulloch. But, it can be done much more comfortably, more efficiently and probably more safely with a quality saw like a Husqvarna or Stihl. When I started turing, I used several borrowed Poulan's, Homelite's and McCulloch's with less tha stellar results. Then, I bought a Stihl 361. There is no comparison! This saw has almost twice the cc's and power and is such an improvment. This particular model is a bit beyond your spending limit of $500, ($639.00), but worth it. There are cheaper Stihl models that are within your price range. Husqvarna's are good saws and are within your price range. You hear people complain that they wish they had spent a little more for a better saw, but you never hear someone complain they bought a saw (or anything else) that just has too much quality.

Re: Chainsaws

#32

Hmmmmmmmm........

Barry Turner

>I'm not sure what happened here........I coulda swore there was a thread about chainsaws.......that I thought I was responding to.............