Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

P&N Gouges

Posts

Re: P&N Gouges

#26

Re: P&N Gouges-dumb engineering?

Gordon Seto

>Fog,

hexadecimal? That's scary.

I don't know how to grow 6 more fingers. It is cold here, I am not ready to go bare feet in the winter outdoors and chop 4 of the digits off. How many I going to count?

Gordon

Re: P&N Gouges

#27

Re: P&N Gouges-dumb engineering?

Fog Tanner

>Gordon,

The scary part is you really don't need any "numbers" past 9. From there it is A (10), B (11), C (12), D (13), E (14), and F (15). 14 in hex is 20 in decimal and five times that is 64 hex or 100 decimal. 26 decimal is 1A hex and 255 is FF. It really helps when you are dealing with larger numbers like 29A3FC in hex which is 001010011010001111111100 in binary or 2,728,956 in decimal. Of course in the early days, some of the females found a liking to hex. A modest figure of 153 lbs is only 99 in hex and a petit classical Grecian figure of 256 lbs in decimal is only 100 in hex....

That is one of the joys of my vocation. But, I also get to work on machines that can add two sets of numbers together several trillion times a second. One of the reasons I like wood turning, I don't have to pick up a rule unless I want to. How big is the bowl? Depends on the size of the wood. What diameter is it, bout that big...... so I would keep my fingers and toes......but thanks for the laugh

Re: P&N Gouges

#28

I bought one

John Scheideman

>Thanks for all the info about the P&N tools. I decided to get another gouge from Doug Thompson instead of trying the P&N. I liked the last one I got from him, he's great to deal with, and I figured I might as well stay with a good thing! Thanks Doug!

John

Re: P&N Gouges

#29

Re: I bought one

Doug Thompson near Cleveland

>John, thank you. It will be sent out tomorrow before I leave for Nashville.