Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Lathe Lighting....

Posts

Re: Lathe Lighting....

#26

Would Lock Line(?)

Stuart Johnson

>be strong enough to hold a lamp head. I'm not sure of the correct name for the stuff but it seems to be flexible, jointed stuff that comes in different sizes. I've seen photos of it being used as blower line on drill presses or larger sized stuff holding vacuum hoses.

If it is strong enough it might be fairly easy to make something the length that suits you best.

Re: Lathe Lighting....

#27

Re: Lathe Lighting....

Wally Dickerman in Arizona

>I have a similar set-up that I take with me when I do demos. It fastens to the end of the bed. I hate turning in the dark.

Wally

Re: Lathe Lighting....

#28

Thanks Everyone...

Wally Dickerman in Arizona

>Lots of very good ideas here. I'm going to study them and see what I can come up with. I'll post a pic when I get the lathe up and running and with the lights installed.

Wally

Re: Lathe Lighting....

#29

Danray Products *LINK*

tek-Brunswick, Ohio

>I received a Danray Products Snake Arm Lamp for Christmas. It was purchased at the Cleveland Rockler Store. I have been very happy with it. It looks like the moffet lamps. Is moffet a brand name or type of lamp? The version sold by Rockler is the 24" arm version and it comes with screws for direct mounting, a C-clamp Base, and a Magnetic base. Currently I am using the magnetic base and it has been sufficient so far. It is made in America and that still gets it points in my book. I wanted to put in a link to Rockler's for it, but couldn't find it on their website. Here is the link to the link to Danray Products.


Danray

Re: Lathe Lighting....

#30

Dick Hines

Re: Lathe Lighting....

Dick Hines

>Is it just me or has anyone else noticed in the pictures posted that there are no chips on the floors. And you all call yourself's woodturners.

LOL

Re: Lathe Lighting....

#31

Re: Lathe Lighting....

Gary in Zirconia,NC

>Look at mine again. Also, My ceiling is 8' 1" so with my system the lamp base is at 7'. I usually like to use the lamp at 6' so it don't bump into my head. The pipe and boards take up 13". I really like it. I just screwed the pipe in untill I felt a resistance with pipe dope on the threads. It swivels very well.

Re: Lathe Lighting....

#32

Re: Lathe Lighting....

Fog Tanner

>Chuck,

Thanks again for the info on the groove. I just need to use it as a post as I won't be hanging the light.

My vocation is programming, and for the majority of that career it was systems programming on real operating systems. Specificly those that run on large IBM mainframes. One reason my spelling has gone to pot. But, as a systems programmer I am put off by Micro$ofts attempts at what they call operating systems. In the business we call them bloatware. Also the reason your Vista machine is running backwards. Most of your memory is being used by Vista to load itself, leaving little for the apps. Something they have been doing since Windowz 95 days...

For a PC, the best operating systems you can get would be OS/2, most of the Unix variants (i.e. Linux, BSD), and NT. That is also the order of stability if you want to run a home server. Unfortunately the PC hardware (i.e. CPU and RAM) lack the necessary features for a real operating system. And also the reason you will not find a truely secure PC operating system or one that can support a virtual environemnt on a large scale.

Re: Lathe Lighting....

#33

New Invention...

Peter Teubel

>It's called a central vac w/20' hose and remote switch on the handle, connected to a cyclone separator dumping into a 55gal drum (this is a separate system from my main DC system).

When I was turning full-time, I never saw the floor. Clean up was a once-a-week thing (beyond shoveling out the major shavings daily). I didn't have the time (or the money) to properly equip my shop to maintain even a modicum of cleanliness. Now, combined with roll-down shades as chip barriers, cleanup is a breeze. And we all know, it's very pleasurable to start work in a clean shop.

Re: Lathe Lighting....

#34

Martin Harris

Re: Lathe Lighting....

Martin Harris

>After spending an unexpected 4.5 hours in a dentist chair today, I think a ceiling mounted dentist light is the answer. The 100lb-soaking wet assitant moved it all over the place with one had while keeping the other in my mouth! I don't know what they cost - after seeing the bill there was no point in asking for a year or so :-)

Re: Lathe Lighting....

#35

Re: Lathe Lighting....

Don in Central Illinois

>I have one, I just haven't had time to hook up yet. I knew of a local dentist that retired and spoke to the people who bought the building and there was an old light that I got for free. Keep looking.

Re: Lathe Lighting....

#36

soaking wet

JohnKJordan in East TN

>>The 100lb-soaking wet assitant

>moved it all over the place with one

>had while keeping the other in my mouth!

>I don't know what they cost -

A new ceiling mount lamp is somewhere between $800 and $2000. I've been looking for a used one, but the dentists I've talked to donate old equipment for a tax break.

But the question I have, why was the assistant soaking wet? Is this a British tradition, a California law, ...?

JKJ

Re: Lathe Lighting....

#37

Yow! I'd better make some more candles!

Allen Neighbors

>

Re: Lathe Lighting....

#38

Re: I've been told that replacement.....

Jamie Donaldson

>...bulbs for those dental lights are very pricy- has anyone here ever paid the price?

Re: Lathe Lighting....

#39

Bad aim?

tek-Brunswick, Ohio

>"But the question I have, why was the assistant soaking wet? Is this a British tradition, a California law, ...?"

How accurately do you spit with a mouth full of Novocain?

Re: Lathe Lighting....

#40

Not bad at all Jamie *LINK*

Dave Peebles Lyons, Ohio!

>Hi Jamie,

They are not bad at all. I have a Pelton & Crane dental light that I bought at an auction for $10.00. I should have played the lottery that day :)

The replacement bulb was $12.00. I got it at Bulbworks.com It has lasted about three years so far.

Best wishes,

Dave


http://www.bulbworks.com

Re: Lathe Lighting....

#41

Martin Harris

Re: Lathe Lighting....

Martin Harris

>"But the question I have, why was the assistant soaking wet? Is this a British tradition, a California law, ...?"

California dentists use suanas and soaking wet assistants to attract business and as an excuse to raise rates :-) And, as you know, we Brits are pretty stange sometimes ....

Seriously, I was a little suprised to find that I had used that expression, as I realise it's not very common in the USA. It basically means that the person is very light (and perhaps, but not necessarily, short.) There is some disagreement (I looked it up) as to if it means naked and wet or fully clothed and wet, but that's a pretty anal analysis.

Re: Lathe Lighting....

#42

The dental assistant was naked???

Stuart Johnson

>

Re: Lathe Lighting....

#43

Re: Here in the US, we say, ....

Allen Neighbors

>"She, or he, wouldn't weigh 80 pounds, soaking wet." That doesn't leave too much room for error. :)

Re: Lathe Lighting....

#44

soaking wet

JohnKJordan in East TN

>>The 100lb-soaking wet assitant

That expression is common, at least here in the East, but written slightly differently as Allen wrote, never as an adjective phrase.

The visual picture of a wet assistant caught my wayward imagination. I confess it would not have been the same picture if you had described the assistant as a 300-lb sumo wrestler, either wet or dry!

JKJ