Spalted Mango Hollowform
steve antonucci
>I turned this out of some spalted mango that David Chung sent me. It's probably 2x3", and hollowed through a 1/2" hole at the top to about 1/16"-1/8" and weights 1.35oz.
Comments welcome.
Steven
Knowledge You Can Build On — Est. 1998
Spalted Mango Hollowform
steve antonucci
>I turned this out of some spalted mango that David Chung sent me. It's probably 2x3", and hollowed through a 1/2" hole at the top to about 1/16"-1/8" and weights 1.35oz.
Comments welcome.
Steven
Re: Spalted Mango Hollowform
Cyril Griesbach
>A very nice form in a very interesting piece of wood. Nicely done, Steve.
Re: Spalted Mango Hollowform
david
>Nice job, Steve. I believe this is from the tree that a tree trimmer told me about, and he said it was an unusually dark colored wood for Mango. Haven't turned anything yet from that branch I got...at least now I can have some expectations on what to expect for color.
2 coats Watco and lacquer over top
steve antonucci
>I can tell you one thing- it drinks oil like I've never seen!
It probaby was an ounce when I finished turning it, and has the other .35 in oil and lacquer...
Steven
Thanks for the kind words
steve antonucci
>
Re: 2 coats Watco and lacquer over top
Allen Neighbors
>Steve that's a nice form, and one awesome piece of timber. It looks pretty porous, so I guess that's why it soaked up a lot of oil.
Nice piece!.
Re: 2 coats Watco and lacquer over top
JohnKJordan in East TN
>>I can tell you one thing- it drinks oil like I've never seen!
I know a guy who would soak even large pieces in bucket of watco oil. Seems like the innermost oil on a thick wall would take a long time to dry, but that might not make any difference to the finish.
JKJ