Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

I need a name (redux)

Posts

I need a name (redux)

#1

I need a name (redux)

eaglesc

>A while back I requested some help in naming a blanks made of bloodwood, toothpicks and veneers.

http://www.woodcentral.com/cgi-bin/turning.pl?noframes;read=167374&v1=e2vrt43&v2=cabinetry&v4=carpentry&v5=g4fh7ic

I sent the blank to a good friend, Dr William Cavanaugh who ,using his dentistry and pencrafting skills brought out the best in what I Started.

This is the result of a joint effort.


img

Re: I need a name (redux)

#2

Maroon Film Fantasy

david

>

Re: I need a name (redux)

#3

Re: I need a name (redux)

Richard Jones

>Well, since he's a dentist and it looks like a whole bunch of rows of molars, I'll take "The Masticator" (in best Arnold S. accent)........:)

That one's not already taken, is it? :)

Kidding aside, beautiful work from both of you guys. Do you have info available on making up the blanks?

Rich

Re: I need a name (redux)

#4

Re: I need a name (redux)

don lewonczyk

>How about-( INFINTY ) cause it just seems to go on and on. My take on it. DonL

Re: I need a name (redux)

#5

Steven Antonucci

Do pens need names?

steve antonucci

>Seems kind of artistic for just a pen? ;-)

So, how many hours go into a pen blank?

Steve

Re: I need a name (redux)

#6

carl

Re: Do pens need names?

carl

>Wow,,did you ever say the wrong thing...99cent pens are just pens,its like calling a wood bowl a wood bowl so what.. Carl

Re: I need a name (redux)

#7

Re: I need a name (redux)

Dennis Yoder

>Celluloid capers, from the edge of 35mm film in disarray. Dennis Y

Re: I need a name (redux)

#8

Re: Do pens need names?

JohnKJordan in East TN

>>So, how many hours go into a pen blank?

I can't begin to imagine how much time he puts into these. In fact, I can't imagine how he even does it. (I'd pay money for this knowledge even if I never used it!)

I hope you were actually joking implying that a pen might not be worthy of artistic expression, or that Art is limited in Form (was Andy Warhol an artist?)! Some people might miss the wink emoticon!

Mr Eagle, how much time DOES it take just to prepare a blank with a pattern like this?

JKJ

Re: I need a name (redux)

#9

Barb Siddiqui

Anything benefits

Barb Siddiqui

>from being 'named.' Didn't you ever watch 'The Little Prince?' Naming something 'tames' it and makes it your own. This piece is fantastic. It looks like Curling Ribbon, like a present as wild as a wave held in the hand to perform one's bidding. What an incredible gift. -BarbS

Re: I need a name (redux)

#10

Ah, yes, and knowing the "true name"

Joanne Adler in Pt. Pleasant, PA

>of something or someone, according to the Wizard of Earthsea, gives you power over it.

Re: I need a name (redux)

#11

Hence my recommendation:

Carol in Illinois

>Lords of Light and Dark

Re: I need a name (redux)

#12

Re: I need a name (redux)

eaglesc

>Wow, kind of overwhelmed by the amount of responses.In other blasnks I have made that I have put far more time into the reception was far less enthusiastic.

The reason I name a design is so I can find it in my XP photo albums.

I may not remember a number or what time of year I made a certain design but I usually remember a name if it describes the design and is memorable enough.

I do like the idea that if I name it I "own" it and have control over it.

"How much time does it take to make a blank like this?"

I honestly don't know.

For the first one, the one I make that proves the concept of the idea time is irrelevant.

If I have an idea for making something that I have never seen before using materials in such a way that one would not expect them to be used time does not enter into the equation.

The process starts with an idea,(that is the hardest part because it is difficult for me to envision "things" in the "abstract")

The second part based on previous things I have done is trying to identify the mechanical "gotchas" or stumbling blocks.

Trying to envision the steps it takes to achieve a desired result.

Or using the "red neck" method of design,

I wonder what would happen if I...

There are numerous"prep stages" to making a blank like this.

Once the "pieces" are crafted, the rest is repetition.

There are 12 lines of wavy tooth picks wrapped in veneer in this blank.

The construction of it is a repetition or a variation of the first one.

It is not as time consuming as you might perceive.

The other difficulty in making something like this is making the attempt and learning by YOUR OWN FAILURES NOT SOMEONE ELSE'S.

Each blank I make is usually a stepping stone to the next one.

Rather than turn the pen that is posted in this thread I immediately started working on what the ultimate goal was.

The blank posted in this thread also made to be given as a gift.

http://www.woodcentral.com/cgi-bin/turning.pl?noframes;read=170943&v1=e2vrt43&v2=lumber+yard&v4=wood+router+table&v5=tyr6gh

The blank below was far more time consuming but received only two comments.


The next step in this design is using materials other than wood.

I am at the point that I Am satisfy with some of the designs and will start timing myself in the construction of them to get a better idea what to charge for my blanks to other turners and my time for a more accurate pricing of the pens I make.

Re: I need a name (redux)

#13

Barb Siddiqui

seems to me

Barb Siddiqui

>you've pretty well boiled down the design process for all things wood and beyond.

So-o-o, did you decide on a name for the one above?

I don't know about this one getting only two comments, but it seems overly busy, to the detriment of the design. Always another factor, I'm often too busy to get here and view all the fine pics and new turnings. Sometimes people are just too busy to click on everything, I think. You are doing fine work with your turnings.

Re: I need a name (redux)

#14

comparing the two

JohnKJordan in East TN

>>The blank below was far more time consuming but

>received only two comments.

Comparing the two blanks, I like the one which began this thread, "A", quite a bit more than the time consuming one, "B". For one thing, "A" is less busy allowing the twisting pattern to stand out nicely against the "background", while in "B" the background is nearly obscured. In "B", the intricate pattern seems to beg for space and does not jump out at me.

As for names, when I saw "A" in finished pen in this thread I immediately thought "Snake Skin".

And I still can't imagine how you construct such a thing. I can understand how a row of toothpicks might be wrapped in veneer, but I can't imagine how such a thing would be sandwiched, orientated, and a assembled to make a twisty pattern all the way around a circumference. I'll just continue to marvel at the mystery!

JKJ


img

Re: I need a name (redux)

#15

Re: I need a name (redux)

Carol in Illinois

>... What Barb and John said.

I think the more recent pen makes a more dramatic statement, and I agree with the observations Barb and John made. It seems to me that the solid areas create a lovely contrast between figure and ground... and to my eye, the solid is the figure against the busier "ground" you've so artistically created.

On the other hand, I have a "permanent spike in my parietal lobe" that makes too much texture seem wavy to me all by itself, so my brain is not happy with pen A, but loves pen B. That could be idiosyncratic... (Then again, MUCH about me is idiosyncratic - like the fact that I have a lathe in my kitchen.)

Carol

Re: I need a name (redux)

#16

Re: I need a name (redux)

john lucas

>Eagle I always enjoy looking at your pens but don't always respond. I simply don't know what to say. it has nothing to do with the pens I'm just not sure what I would say other than Wow.

Re: I need a name (redux)

#17

Re: I need a name (redux)

eaglesc

>"Eagle I always enjoy looking at your pens but don't always respond. I simply don't know what to say."

I am always open to comments or suggestions.MAny times I put time and effort into an idea but not sure if the finished piece has a pleasing appearance to others.

There have been a few That I thought were "wowsers" and received a ho-hum and others I thought were Ho hum got accolades up the KAzoo.

I am always looking for input and in the future I will make certain I invite comments or critiques.