>I finally put the components of a #3 together and tried it out. One nice tool! This bowl was actually in the burn box when I decided to try the Hunter on it. It is a walnut scab that I had roughed out maybe 2 years ago. It has a couple of side knots, bark inclusion on one side, and several voids. Tell me what you think.
>Actually, quite impressed. That's a rather large void. If the Hunter #3 allowed you to do that, I am impressed! By the way, I had a Hunter #3 in my Christmas stocking this year. It's still in the clear plastic tube. Now, I can't wait to try it. Tell me more about the Hunter.
>Barry, The extent of my experience with it is finish turning two roughed out bowls, one in cherry. I tried to follow soom of the recommendation that John Lucas has posted over the last month or so. I rotated the tool about 45 degrees so that it was "shear/scraping" The only trouble I had was turning the inside corner between the bottom and side of the bowl. Believe it is a matter of tool position to solve that. I'm sure you will like it.
>Without measuring,I'd say its close to 3/8" It is mounted on a 7/16 rod that is ground slightly where the cutter sits. (Shop built) I'll try to remember to check tomorrow.