Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Need a dowel

Posts

Need a dowel

#1

Need a dowel

Larry in NW Ohio

>I`m looking for a dowel rod for a baby bed for our 4th grandchild. This will be my 3rd bed I made and each one got progressively a little harder for me to make,but just loved doing it. Well before I bore everyone to death. I need an Oak dowel that is 2" in dia and 5 feet long. I have been looking all around the country from addresses from Google and no one does them anymore unless you buy a truckload and I only need two. I had a place in Mich. that I got them from the last time, but they don`t do them any more. If anyone is interested in doing them for me or they know of someone that does them for sure I`d really appreciate it. Of course I`d pay for to make them and also shipping, I would like some kind of estimate first. Thanks and Merry Christmas. Larry in Ohio

Re: Need a dowel

#2

Re: Need a dowel

Barry Irby

>Larry, Didn't we talk about this before? Don't make me pull this Forum over to the side of the road and explain this to you again.

Actually, I have a piece of hand rail stock that appears to be red oak and is 1 3/4" in diameter, and 51" long. It has a "flat" on one side that is about 7/8" wide, so it is not a full dowel. A friend gave it to me and I can ask him where he got it. Pretty sure it came for a Borg or some sort of mill work shop and is just a piece of hand railing. You can have my piece of the price of the shipping.

I don't think I have a cove or quarter round bit that will do it, but I can check. My lathe will not turn a five foot piece, the bed is too short.

If no one else comes through for you let me know. If I have to buy a bit I will or I might be able to borrow a lathe.

Re: Need a dowel

#3

JL

Re: Need a dowel

JL

>Can it be segmented? I.E. can there be two ~30" sections? It would be relatively easy to turn a 32" (or 33") section with a 30" 2" part and a 1" in diameter tenon of 2-3". The remaining 30" section could be drilled with a 1" in diameter mortise. Just glue the two sections together.

I'll do it for you if this is an okay way to do it. Let me know.

Re: Need a dowel

#4

Re: Need a dowel

Steven Kubien

>If it was me I would chuck a 1/4 round bit in my router and go at it that way. If you cannot find timber thick enough where you are I would consider laminating some 3/4" stock together.

My 2 cents and perhaps worth less.

Steve Kubien

Re: Need a dowel

#5

Re: Need a dowel

Larry in NW Ohio

>Barry There`s no need to pull over, I`ll be good.I`m still just looking around. I think I called every place on google. I was in front of this stupid computer calling for over 3 hours yesterday. It was just fasinating all the places that said they made them-didn`t. I was really hoping on the place I bought them from 4 years ago would come through. Just wishful thinking, If I understood thelady I talked to, and she was the same one I talked to 4 years ago, I think they make cabinents now. Very genorous offer, I`ll keep it in mind, but I think I really need it to be 2" and it can have a small flat on it, maybe 3/4". Thanks again. Larry

Re: Need a dowel

#6

Re: Need a dowel

john lucas

>I agree with Steve. If you can't find a quarter round bit big enough find someone with a shaper to do it for you.

Re: Need a dowel

#7

Re: Need a dowel

Larry in NW Ohio

>Thanks JL That will be my last resort. I`m going to keep all these suggestions,and good ones they are, in mind. I have a few thoughts also. Thanks. Larry

Re: Need a dowel

#8

Peavey Manufacturing *LINK*

Jorge Castaneda~Downeast Maine

>They stock all kinds of dowels for forestry gadgets, 2" ash is one of their standards, and they turn them right there, I bet you can ask for oak and they will be happy to make them for you.

Good luck

Jorge


Peavey