>Cheap digital camera forgotten and abandoned in a cardboard box along with a whole pile of surplus floppies some cd's and other detritus cleared off the desk, stuffed in the spare room ... Just looked back up the stairs as I was shutting the front door to go on holiday for 2 weeks ... Oooohhhh whats all that smoke coming down the stairs.... very little fire damage but the smoke was lethal. Total redecoration and new soft furnishings throughout ...
>a few years back, the halogen torchier lamps were all the rage. I was sitting in my sunroom when a bug must have landed on the shield, because I began smelling "roast something".
The shield was so hot, it had fried him instantly. I can only imagine what the bulb temp must have been. I rewired the lamp for a normal bulb after that.
>It's cool and safer than flourescent because there is no strobe effect. I use a combination of Flourescent (CFI, overhead), Xenon (main task light), and LED (spot task light).
>Very scarey story, Carol! I'm pretty good about unplugging things, but I'll have to take another think, just to be sure. I've always been afraid of the halogens because of the intense heat. Your story puts an end to any halogens in my house/shop. Thanks for the warning... I'm soooo glad you and yours are safe!
This is a very timely thread. I was planning to construct a Frugal Photo Booth (like what is posted on WOW) over the next couple of weeks. Had it not been for Carol sharing her experience in this thread, I would have gone with the halogens.
Couple of questions.
1. What about the compact daylight flourescent bulbs at Lowes? Any experience with them? What should I look for as far as lumen, watt, temperature and CRI ratings in such a bulb?
2. You mentioned having to buy a reflector, stand, etc. I am assuming that you are not referring to the typical magnetic base work light fixture. Can you direct me to any frugal sources for such a set up?
glad to hear you got that one the nick of time, you must be living right.
The other night, some young ladies were shooting a video in town and their light source were LED's flashlights, with lots of them, like 24 in each unit, I passed my hand in front and it was just slightly warm.
>I have used halogens to do copy work at my job and I've worked there 20 years and have only replaced the bulbs twice. The expensive bulbs are less than $5 and I can buy most lamps at about 10 places around my small town. I had to special order our 24" flourescent color corrected bulbs and it took 4 weeks to get them. :)
>I've looked at all the compact flourescents at the Borg stores and none of them are color correct for photo uses and 90% don't even tell you what they are on the box. I've bought 4 different brands to use in my house and I like to check them for color temperature simply because I'm curious and have a color meter. You would need $200 in filters and a good color temperature meter to be able to get most of them back to Daylight film color balance.
You could mount them in just about any lamp base but it's nice to have some control over the light direction which is why I recommend some sort of reflector. I say you have to add in the cost because even the cheapest reflectors at the Borg stores are $5 and that may or may not be with some sort of mounting device.
The quartz work lights can be purchased with a stand quite inexpensively. If you leave the Heat glass in place you have to get flammable objects quite close for several minutes to get them to start smoking. I've used quartz lights for many many years with only the one problem that I mentioned. I'm not saying they are perfectly safe you do have to use caution but they are the best photo alternative I've been able to find without spending a lot of money.
Jamie Donaldson who wrote the article on Wow also recommends the Quartz lights for his Frugal booth. We've discussed lighting and you have to spend quite a bit more than the quartz lights cost to get functional lights i/e lamps, reflectors,stands etc.
You can obviously use a lot of different lighting to achieve the same results so each person has to choose what works best for them. Quartz light systems can run as little as $80 for a pair, The flourescents look to me like you would easily spend more than that for a pair. You can buy low end professional Flash units for as little as $300 each if you want to go that route. To prove a point to one of my students I set up a shoot using 2 candles. He was blown away by the results. The exposure was over a minute and talk about fire hazard, I had to really be careful with the panels and reflectors. Heck I couldn't even do that now that they've installed the new fire and smoke detectors, you look at them sideways and they go off.
5000 Degree Kelvin is a good all around photo taking color temperature. But if your camera has a white balance feature you should use it to compensate for the subtle differences in lighting.
If you plan on editing the photos after taking them you might also want to see if very slightly under-exposing them gives you more options. With the photo editing programs available today it's very easy to lighten a photo and enhance the detail, and nearly impossible to darken an overexposed photo. Some cameras have the option to "bracket" photos automatically. This takes one picture at an mathematically determined "optimal" exposure, then automatically takes one photo slightly over exposed and then one photo slightly under exposed. After you take the image off the camera you can select the one that looks the best.
Below is a link to one vendor website that has a collection of digital photo "how to's".
>...rated at 5200K, but the Kelvin rating for tungsten is 3200~3400K. This warmer color temp. range works very well for wood when properly matched-camera sensor to light source output.