Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

50 year old box

Posts

50 year old box

#1

Roger in MO

50 year old box

Roger in MO

>The blank for this box was 3/4 walnut face glued with white glue (we called it polyvinyl glue.) The boards have changed dimension slightly over the years revealing the glue lines. The outside was turned with a spindle gouge used as a scraper. The inside was hollowed with a skew used as a scaper. The finish is many coats of lacquer, sanded and polished with pumice and then rottenstone, both mixed with oil. Waxed with floor wax.

No chucks were available. The blank was attached directly to the face plate with screws. I did use a wooden jam chuck to turn the top of the lid.

The form was modeled after a tobacco can.

Roger


img

Re: 50 year old box

#2

Re: 50 year old box

Barry Turner

>Things sure have changed! I have a similar box, probably about the same vintage. It's not nearly as nice, though. I made it when I was in high school. I had no lathe in those days. I did have an old Craftsman sabre saw and a $10 electric drill with a body grinding disc attached. I sawed walnut rings from a board, stacked and glued them together, then shaped it round with the grinding disc. Crude? Pitifully so! But it still qualified as my first box. The lack of tools isn't all that limiting if your imagination is intact.