Re: Dave, I have a U flute...
DWR
>Allen,
It would catch if you keep the flutes vertical to the axis from the lip to the bottom of the bowl. That is where the "rolling" of the gouge comes into play. I roll it over to the 1:00-3:00 angle as I progress down the side, through the transition and on to the bottom.
Trent Bosch knocks the leading corner back a bit to help eliminate catching... looks like a part traditional and part fingernail/swept bevel.
I watched Richard Raffan run his gouge up to the top of the bowls lip and back down to the center of the bowl in one continuous motion. I have made that cut only one time... worked like a charm but really freaked me out watching the gouge run up to 11:00 or so with the flute nearly upside down, then skate down to the bottom of the bowl... once was enough!
Bottom line, do what feels safe and comfortable. 90% of my gouge work is with the flute at 70� to 90� to the center axis of the bowl... pull cuts from the center, push cuts from the lip, shear scraping pull cuts from the bottom back through the transition and to the lip, etc...
Stay safe;)
Dave



